MAX16919 Datasheet | Maxim Integrated

EVALUATION KIT AVAILABLE Click here for production status of specific part numbers. 500m A- 3A Automotive Hi-Speed USB Protector with USB Host-Charger Port Detection General Description The MAX16919 provides high-ESD and short-circuit protection for the low-voltage internal USB data and USB power line in automotive radio, navigation, connectivity, and USB hub applications. The device supports both Hi-Speed USB (480Mbps) and full-speed USB (12Mbps) operation. In addition, the device includes integrated circuitry to enable fast-charging for consumer devices adhering to the Hi-Speed USB host-charger port-detection protocol. The short-circuit protection Features include short-to-battery on the protected HVBUS, HVD+, and HVD- outputs, as well as short-to-HVBUS on the protected HVD+ and HVD- outputs. The device is capable of a short-to-battery condition of up to +18V. Short-to-GND and overcurrent protection are also provided on the HVBUS output to protect the internal BUS power rail from overcurrent faults. The device Features high-ESD protection to ±15k V Air Gap method and ±8k V Contact method on all protected HVBUS, HVD+, and HVD- outputs. The device Features two low 4.0Ω on-resistance Hi-Speed USB switches and a current-limited low-voltage 22mΩ BUS switch, and provides an integrated high-voltage external power-switch controller. The BUS switch can start up into large capacitive nonpliant USB loads. The device also Features an enable input, a fault output, and an integrated host-charger port-detection circuit adhering to the USB 2.0 battery charging specification. The device is available in a 16-pin QSOP package, and operates over -40°C to +105°C temperature range. Features - - Two 4.0Ω (typ) RON USB 2.0 Data Switches - - Current-Limited 22mΩ (typ) BUS Switch with High- Capacitive Load Capability - - 480Mbps or 12Mbps USB 2.0 Operation - - Short-to-Battery and Short-to-GND Protection on Protected HVBUS Output - - Short-to-Battery and Short-to-HVBUS Protection...