Datasheet4U Logo Datasheet4U.com

MAX19005 - 200Mbps ATE Drivers/Comparators

General Description

The MAX19005 four-channel, ultra-low-power, pinelectronics IC includes a two-level pin driver, a window comparator, a passive load, and force-and-sense Kelvin-switched parametric measurement unit (PMU) connections for each channel.

Key Features

  • a -1V to +5.2V voltage range, includes high-impedance modes, and is highly linear even at low voltage swings. The window comparator features 240MHz equivalent input bandwidth and programmable output voltage levels. The passive load provides pullup and pulldown voltages to the device-under-test (DUT). Low leakage and high impedance are operational configurations that are programmed through a 3-wire, low-voltage, CMOS-compatible serial interface. Highspeed PMU switching is realized through dedicat.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX190 Low-Power / 12-Bit Sampling ADCs Maxim
MAX1901 Low-Noise Power-Supply Controllers Maxim
MAX1902 Low-Noise Power-Supply Controllers Maxim
MAX1904 Low-Noise Power-Supply Controllers Maxim
MAX1907A Quick-PWM Master Controllers Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX1920 400mA Step-Down DC-DC Converters
MAX1921 400mA Step-Down DC-DC Converters
MAX1928 PWM Step-Down DC-DC Converters
MAX19516 100Msps ADC
MAX1954A Current-Mode PWM Buck Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-6092; Rev 0; 12/11 MAX19005 Quad, Ultra-Low-Power, 200Mbps ATE Drivers/Comparators General Description The MAX19005 four-channel, ultra-low-power, pinelectronics IC includes a two-level pin driver, a window comparator, a passive load, and force-and-sense Kelvin-switched parametric measurement unit (PMU) connections for each channel. The driver features a -1V to +5.2V voltage range, includes high-impedance modes, and is highly linear even at low voltage swings. The window comparator features 240MHz equivalent input bandwidth and programmable output voltage levels. The passive load provides pullup and pulldown voltages to the device-under-test (DUT).