Datasheet4U Logo Datasheet4U.com

MAX19516 - 100Msps ADC

General Description

The MAX19516 dual-channel, analog-to-digital converter (ADC) provides 10-bit resolution and a maximum sample rate of 100Msps.

Key Features

  • o Very-Low-Power Operation (57mW/Channel at 100Msps) o 1.8V or 2.5V to 3.3V Analog Supply o Excellent Dynamic Performance 60dBFS SNR at 70MHz 82dBc SFDR at 70MHz o User-Programmable Adjustments and Feature Selection through an SPI™ Interface o Selectable Data Bus (Dual CMOS or Single Multiplexed CMOS) o DCLK Output and Programmable Data Output Timing Simplifies High-Speed Digital Interface o Very Wide Input Common-Mode Voltage Range (0.4V to 1.4V) o Very High Analog Input Bandwidth (> 850MHz) o.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1951 2A PWM Step-Down DC-to-DC Regulators Maxim
MAX1951A PWM DC-DC Step-Down Regulator Maxim Integrated Products
MAX195 16-Bit / 85ksps ADC with 10A Shutdown Maxim
MAX1952 2A PWM Step-Down DC-to-DC Regulators Maxim
MAX19527 1.8V ADC Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX1954A Current-Mode PWM Buck Controller
MAX19005 200Mbps ATE Drivers/Comparators
MAX1920 400mA Step-Down DC-DC Converters
MAX1921 400mA Step-Down DC-DC Converters
MAX1928 PWM Step-Down DC-DC Converters

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-4226; Rev 2; 9/10 EVAALVUAAILTAIOBNLEKIT Dual-Channel, 10-Bit, 100Msps ADC MAX19516 General Description The MAX19516 dual-channel, analog-to-digital converter (ADC) provides 10-bit resolution and a maximum sample rate of 100Msps. The MAX19516 analog input accepts a wide 0.4V to 1.4V input common-mode voltage range, allowing DCcoupled inputs for a wide range of RF, IF, and baseband front-end components. The MAX19516 provides excellent dynamic performance from baseband to high input frequencies beyond 400MHz, making the device ideal for zero-intermediate frequency (ZIF) and highintermediate frequency (IF) sampling applications. The typical signal-to-noise ratio (SNR) performance is 60dBFS and typical spurious-free dynamic range (SFDR) is 82dBc at fIN = 70MHz and fCLK = 100MHz.