Datasheet4U Logo Datasheet4U.com

MAX20340 - Bidirectional DC Powerline Communication Management

General Description

The MAX20340 is a universal bidirectional DC powerline communication (PLC) management IC with a 166.7kbps maximum bit rate.

The device is capable of a maximum of 1.2A charge current.

Key Features

  • a slave detection circuit that flags an interrupt to the system when the PLC master detects the presence of a PLC slave on the powerline. This function allows the system to remain in a lowpower state until a slave device is connected. Many of the features of the MAX20340, such as master/ slave mode, I2C address, dual/single PLC slave mode, and PLC slave address, are pin configurable. The device is available in a 9-bump, 0.4mm pitch, 1.358mm x 1.358mm wafer-level package (WLP).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX2034 Ultra-Low-Noise Amplifier Maxim Integrated Products
MAX203 +5V-Powered / Multichannel RS-232 Drivers/Receivers Maxim
MAX2031 650MHz to 1000MHz Upconversion/ Downconversion Mixer Maxim Integrated Products
MAX2032 650MHz to 1000MHz Upconversion/Downconversion Mixer Maxim Integrated Products
MAX2035 Ultrasound Variable Gain Amplifier Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX20343 Low Noise 3.5W Buck-Boost Regulator
MAX20345 PMIC
MAX20303 PMIC
MAX20310 Ultra-Low Quiescent Current PMIC
MAX20313 500mA to 6A Adjustable Current-Limit Switches

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Click here for production status of specific part numbers. MAX20340 General Description The MAX20340 is a universal bidirectional DC powerline communication (PLC) management IC with a 166.7kbps maximum bit rate. The device is capable of a maximum of 1.2A charge current. The MAX20340 features a slave detection circuit that flags an interrupt to the system when the PLC master detects the presence of a PLC slave on the powerline. This function allows the system to remain in a lowpower state until a slave device is connected. Many of the features of the MAX20340, such as master/ slave mode, I2C address, dual/single PLC slave mode, and PLC slave address, are pin configurable. The device is available in a 9-bump, 0.4mm pitch, 1.358mm x 1.358mm wafer-level package (WLP).