Datasheet4U Logo Datasheet4U.com

MAX25250 - Four Output Mini PMIC

General Description

The MAX25250 is a high-efficiency, four-output PMIC that integrates three DC-DC converters and a high-PSRR LDO, with OV/UV monitoring on all outputs.

OUT1 is a 1A high-voltage synchronous step-down converter operating from power over coax or car battery.

Key Features

  • a 2.2MHz fixed-frequency PWM mode for better noise immunity and load-transient response. The high-frequency operation allows for the use of all ceramic capacitors and minimizes external components. The programmable spread-spectrum frequency modulation minimizes radiated electromagnetic emissions. Integrated low-RDS(ON) switches improve efficiency at heavy loads and make layout simpler than discrete solutions. Sequencing through the use of EN23 and EN4 pins and factory-settable output voltages in.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX25252 Five-Output ASIL B PMIC Analog Devices
MAX252 Dual RS-232 Transceiver Maxim
MAX25201 36V HV Synchronous Boost Controllers Analog Devices
MAX25202 36V HV Synchronous Boost Controllers Analog Devices
MAX25203D Dual-Phase Synchronous Boost Controllers Analog Devices

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX2530 Quadruple-Mode PCS/Cellular/GPS LNA/Mixers
MAX2537 Quadruple-Mode PCS/Cellular/GPS LNA/Mixers
MAX2550 WCDMA Femtocell Transceiver
MAX25600 Synchronous High-Voltage Four-Switch Buck- Boost LED Controller
MAX25610A Synchronous Buck and Buck-Boost LED Driver/DC-DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Click here to ask about the production status of specific part numbers. MAX25250 Four Output Mini PMIC for Camera Applications General Description The MAX25250 is a high-efficiency, four-output PMIC that integrates three DC-DC converters and a high-PSRR LDO, with OV/UV monitoring on all outputs. OUT1 is a 1A high-voltage synchronous step-down converter operating from power over coax or car battery. OUT2 and OUT3 low-voltage synchronous step-down converters operate from OUT1 and provide a 0.8V to 3.9875V output voltage range. OUT2 can deliver 1.2A for high megapixel cameras and high-speed serializers. OUT3 can deliver 1.2A to power the secondary rails of the imager, serializer, and MCU. OUT4 is a low-voltage, low-noise, high-PSRR LDO for imager power. All buck converters achieve ±1.