Datasheet4U Logo Datasheet4U.com

MAX271 - Dual 2nd-Order Continuous Lowpass Filter

Download the MAX271 datasheet PDF. This datasheet also covers the MAX270 variant, as both devices belong to the same dual 2nd-order continuous lowpass filter family and are provided as variant models within a single manufacturer datasheet.

General Description

The MAX270/MAX271 are digitally-programmed, dual second-order continuous-time lowpass filters.

Their typical dynamic range of 96dB surpasses most switched capacitor filters which require additional filtering to remove clock noise.

Key Features

  • S Continuous-Time Filtering - No Clock Required S Dual 2nd-Order Lowpass Filters S Sections Ind.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX270-MaximIntegrated.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX2700 1.8GHz to 2.5GHz Direct Downconversion Receivers Maxim
MAX2701 2.1 GHz to 2.5 GHz direct downconversion receiver Maxim
MAX2720 1.7GHz to 2.5GHz / Direct I/Q Modulator with VGA and PA Driver Maxim
MAX2721 1.7GHz to 2.5GHz / Direct I/Q Modulator with VGA and PA Driver Maxim
MAX274 4th- and 8th-Order Contnuous-Time Active Filters Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX270 Dual 2nd-Order Continuous Lowpass Filter
MAX2742 Single-Chip Global Positioning System Receiver Front-End
MAX2751 2.4GHz Monolithic Voltage-Controlled Oscillators
MAX2769B Universal GPS Receiver
MAX2769C Universal GNSS Receiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX270/MAX271 Digitally-Programmed, Dual 2nd-Order Continuous Lowpass Filter General Description The MAX270/MAX271 are digitally-programmed, dual second-order continuous-time lowpass filters. Their typical dynamic range of 96dB surpasses most switched capacitor filters which require additional filtering to remove clock noise. The MAX270/MAX271 are ideal for anti-aliasing and DAC smoothing applications and can be cascaded for higher-order responses. The two filter sections are independently programmable by either microprocessor (FP) control or pin strapping. Cutoff frequencies in the 1kHz to 25kHz range can be selected. The MAX270 has an on-board, uncommitted op amp, while the MAX271 has an internal track-and-hold (T/H).