Datasheet4U Logo Datasheet4U.com

MAX4043 - Micropower Rail-to-Rail I/O Op Amps

This page provides the datasheet information for the MAX4043, a member of the MAX4040 Micropower Rail-to-Rail I/O Op Amps family.

Description

The MAX4040

MAX4044 family of micropower op amps operates from a single +2.4V to +5.5V supply or dual ±1.2V to ±2.75V supplies and have rail-to-rail input and output capabilities.

These amplifiers provide a 90kHz gain-bandwidth product while using only 10µA of supply current per amplifier.

📥 Download Datasheet

Datasheet preview – MAX4043

Datasheet Details

Part number MAX4043
Manufacturer Maxim Integrated
File Size 345.43 KB
Description Micropower Rail-to-Rail I/O Op Amps
Datasheet download datasheet MAX4043 Datasheet
Additional preview pages of the MAX4043 datasheet.

📁 Similar Datasheet

  • MAX404 - Video Operational Amplifier (Maxim)
  • MAX400 - Ultra Low Offset Voltage Operational Amplifier (Maxim)
  • MAX4000 - 2.5GHz 45dB RF-Detecting Controllers (Maxim)
  • MAX40002 - nanoPower 4-Bump Comparator (Analog Devices)
  • MAX40003 - nanoPower 4-Bump Comparator (Analog Devices)
  • MAX40004 - nanoPower 4-Bump Comparator (Analog Devices)
  • MAX40005 - nanoPower 4-Bump Comparator (Analog Devices)
  • MAX40008 - 6-Bump WLP Comparators (Analog Devices)
  • MAX40009 - 6-Bump WLP Comparators (Analog Devices)
  • MAX4001 - 2.5GHz 45dB RF-Detecting Controllers (Maxim)
Other Datasheets by Maxim Integrated
  • MAX4040 - Micropower Rail-to-Rail I/O Op Amps
  • MAX4041 - Micropower Rail-to-Rail I/O Op Amps
  • MAX4042 - Micropower Rail-to-Rail I/O Op Amps
  • MAX4044 - Micropower Rail-to-Rail I/O Op Amps
  • MAX40000 - 1.7V nanoPower Comparators
  • MAX40001 - 1.7V nanoPower Comparators
  • MAX40002 - nanoPower 4-Bump Comparator
  • MAX40003 - nanoPower 4-Bump Comparator

Full PDF Text Transcription

Click to expand full text
19-1377; Rev 1; 9/05 MAX4040–MAX4044 Single/Dual/Quad, Low-Cost, SOT23, Micropower Rail-to-Rail I/O Op Amps ________________General Description The MAX4040–MAX4044 family of micropower op amps operates from a single +2.4V to +5.5V supply or dual ±1.2V to ±2.75V supplies and have rail-to-rail input and output capabilities. These amplifiers provide a 90kHz gain-bandwidth product while using only 10µA of supply current per amplifier. The MAX4041/MAX4043 have a low-power shutdown mode that reduces supply current to less than 1µA and forces the output into a high-impedance state. The combination of low-voltage operation, rail-to-rail inputs and outputs, and ultra-low power consumption makes these devices ideal for any portable/battery-powered system.
Published: |