Datasheet4U Logo Datasheet4U.com

MAX4092 - Rail-to-Rail Op Amps

Description

The single MAX4091, dual MAX4092, and quad MAX4094 operational amplifiers combine excellent DC accuracy with Rail-to-Rail® operation at the input and output.

Since the common-mode voltage extends from VCC to VEE, the devices can operate from either a single supply (2.7V to 6V) or split supplies (±1.

📥 Download Datasheet

Datasheet preview – MAX4092

Datasheet Details

Part number MAX4092
Manufacturer Maxim Integrated
File Size 509.59 KB
Description Rail-to-Rail Op Amps
Datasheet download datasheet MAX4092 Datasheet
Additional preview pages of the MAX4092 datasheet.

📁 Similar Datasheet

  • MAX409 - 1.2A Max / Single/Dual/Quad / Single-Supply Op Amps (Maxim)
  • MAX4090 - 3V/5V / 6dB Video Buffer with Sync-Tip Clamp and 150nA Shutdown Current (Maxim)
  • MAX4091 - Single/Dual/Quad / Micropower / Single-Supply / Rail-to-Rail Op Amps (Maxim)
  • MAX4094 - Single/Dual/Quad / Micropower / Single-Supply / Rail-to-Rail Op Amps (Maxim)
  • MAX409A - (MAX406 - MAX419) Single-Supply Op Amps (Maxim)
  • MAX409B - (MAX406 - MAX419) Single-Supply Op Amps (Maxim)
  • MAX400 - Ultra Low Offset Voltage Operational Amplifier (Maxim)
  • MAX4000 - 2.5GHz 45dB RF-Detecting Controllers (Maxim)
  • MAX40002 - nanoPower 4-Bump Comparator (Analog Devices)
  • MAX40003 - nanoPower 4-Bump Comparator (Analog Devices)
Other Datasheets by Maxim Integrated

Full PDF Text Transcription

Click to expand full text
19-2272; Rev 0; 1/02 MAX4091/MAX4092/MAX4094 Single/Dual/Quad, Micropower, Single-Supply, Rail-to-Rail Op Amps General Description The single MAX4091, dual MAX4092, and quad MAX4094 operational amplifiers combine excellent DC accuracy with Rail-to-Rail® operation at the input and output. Since the common-mode voltage extends from VCC to VEE, the devices can operate from either a single supply (2.7V to 6V) or split supplies (±1.35V to ±3V). Each op amp requires less than 130µA of supply current. Even with this low current, the op amps are capable of driving a 1kΩ load, and the input-referred voltage noise is only 12nV/√Hz. In addition, these op amps can drive loads in excess of 2000pF.
Published: |