Datasheet4U Logo Datasheet4U.com

MAX4275 - Fixed-Gain GainAmps/Open-Loop Op Amps

Download the MAX4275 datasheet PDF. This datasheet also covers the MAX4174 variant, as both devices belong to the same fixed-gain gainamps/open-loop op amps family and are provided as variant models within a single manufacturer datasheet.

General Description

The MAX4174/MAX4175/MAX4274/MAX4275 GainAmp™ family combines a low-cost Rail-to-Rail® op amp with precision internal gain-setting resistors and VCC / 2 biasing.

Factory-trimmed on-chip resistors decrease design size, cost, and layout, and provide 0.1% gain accuracy.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX4174_MaximIntegratedProducts.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX427 Low Noise / High-Precision Op Amps Maxim
MAX4270 Ultra-Low-Distortion / Single-Supply / 300MHz Op Amps with Enable Maxim
MAX420 15 Volt Chopper Stabilized Operational Amplifier Maxim
MAX4208 Precision Instrumentation Amplifiers Maxim Integrated Products
MAX4209 Precision Instrumentation Amplifiers Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX4271 3V to 12V Current-Limiting Hot-Swap Controllers
MAX4272 3V to 12V Current-Limiting Hot-Swap Controllers
MAX4273 3V to 12V Current-Limiting Hot-Swap Controllers
MAX4274 Fixed-Gain GainAmps/Open-Loop Op Amps
MAX4278 Gain of +1/Gain of +2 Closed-Loop Buffers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1407; Rev 3; 8/99 MAX4174/5, MAX4274/5, MAX4281/2/4† SOT23, Rail-to-Rail, Fixed-Gain GainAmps/Open-Loop Op Amps General Description The MAX4174/MAX4175/MAX4274/MAX4275 GainAmp™ family combines a low-cost Rail-to-Rail® op amp with precision internal gain-setting resistors and VCC / 2 biasing. Factory-trimmed on-chip resistors decrease design size, cost, and layout, and provide 0.1% gain accuracy. Fixed inverting gains from -0.25V/V to -100V/V or noninverting gains from +1.25V/V to +101V/V are available. These devices operate from a single +2.5V to +5.5V supply and consume only 300µA. GainAmp amplifiers are optimally compensated for each gain version, achieving exceptional GBW products up to 23MHz (AV = +25V/V to +101V/V).