Datasheet4U Logo Datasheet4U.com

MAX4834 - 250mA LDO Linear Regulators

General Description

The MAX4834/MAX4835 family of low-dropout (LDO) linear regulators feature an accurate current-limiting switch with an integrated FLAG or RESET function.

These devices operate from 2.5V to 5.5V and deliver up to 250mA of load current at a preset output voltage.

Key Features

  • include a low 90µA quiescent current, a 0.1µA shutdown current. The MAX4834/MAX4835 are available in space-saving 6-pin SOT23 and TDFN packages. Each device is specified over the -40°C to +85°C extended temperature range. Contact factory for other programmed output voltage versions from 1.5V to 3.3V in 100mV increments. For pin-compatible 100mA versions of this device, refer to the MAX4832/MAX4833. For pin-compatible 500mA versions of this device, refer to the MAX4836/MAX4837.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX483 Overvoltage Protection Controllers with Status FLAG Maxim
MAX4830 (MAX4826 - MAX4831) 50mA/100mA Current-Limit Switches Maxim Integrated Products
MAX4831 (MAX4826 - MAX4831) 50mA/100mA Current-Limit Switches Maxim Integrated Products
MAX4838 Overvoltage Protection Controllers Maxim
MAX4839 Overvoltage Protection Controllers Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX4835 250mA LDO Linear Regulators
MAX483E RS-485/RS-422 Transceivers
MAX4805 Low-Noise Operational Amplifiers
MAX4805A Low-Noise Operational Amplifiers
MAX4842 Overvoltage Protection Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX4834/MAX4835 250mA LDO Linear Regulators with Current-Limiting Switch General Description The MAX4834/MAX4835 family of low-dropout (LDO) linear regulators feature an accurate current-limiting switch with an integrated FLAG or RESET function. These devices operate from 2.5V to 5.5V and deliver up to 250mA of load current at a preset output voltage. Preset output voltage levels are 1.8V/2.5V/2.8V/3.0V/3.3V. The MAX4834/MAX4835 offer a programmable soft-start control function to eliminate false reset during startup. The MAX4834 provides a FLAG function to notify the system when the load current exceeds the limit. The MAX4835 provides a RESET function to notify the system when the output drops below the threshold.