Datasheet4U Logo Datasheet4U.com

MAX5183 - Current/Voltage Simultaneous-Output DACs

Download the MAX5183 datasheet PDF. This datasheet also covers the MAX5180 variant, as both devices belong to the same current/voltage simultaneous-output dacs family and are provided as variant models within a single manufacturer datasheet.

General Description

The MAX5180 contains two 10-bit, simultaneousupdate, current-output digital-to-analog converters (DACs) designed for superior performance in communications systems requiring analog signal reconstruction with low distortion and low-power operation.

Key Features

  • 2.7V to 3.3V Single-Supply Operation.
  • Wide Spurious-Free Dynamic Range: 70dB at fOUT = 2.2MHz.
  • Fully Differential Outputs for Each DAC.
  • ±0.5% FSR Gain Mismatch.
  • ±0.2° Phase Mismatch.
  • Low-Current Standby or Full-Shutdown Modes.
  • Internal 1.2V Low-Noise Bandgap Reference.
  • Small 28-Pin QSOP Package PART MAX5180BEEI MAX5183BEEI Ordering Information TEMP RANGE -40°C to +85°C -40°C to +85°C PIN-.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX5180_MaximIntegratedProducts.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX518 2-Wire Serial 8-Bit DACs Maxim
MAX5180 Current/Voltage Simultaneous-Output DACs Maxim
MAX5181 10-Bit / 40MHz / Current/Voltage-Output DACs Maxim
MAX5182 40MHz Current/Voltage Alternate-Phase Output DACs Maxim
MAX5184 10-Bit / 40MHz / Current/Voltage-Output DACs Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX5185 40MHz Current/Voltage Alternate-Phase Output DACs
MAX5189 Dual / 8-Bit / 40MHz / Current/Voltage / Simultaneous-Output DACs
MAX5113 14-Bit Current DAC
MAX5121 Serial Voltage-Output DACs
MAX5123 Force/Sense DACs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1577; Rev 4; 12/03 MAX5180/MAX5183 Dual, 10-Bit, 40MHz, Current/Voltage Simultaneous-Output DACs General Description The MAX5180 contains two 10-bit, simultaneousupdate, current-output digital-to-analog converters (DACs) designed for superior performance in communications systems requiring analog signal reconstruction with low distortion and low-power operation. The MAX5183 provides equal specifications, with on-chip precision resistors for voltage output operation. The devices are designed for 10pVs glitch operation to minimize unwanted spurious signal components at the output. An on-board 1.2V bandgap circuit provides a well-regulated, low-noise reference that can be disabled for external reference operation.