Datasheet4U Logo Datasheet4U.com

MAX5917 - +65V Simple Swapper Hot-Swap Switches

Download the MAX5917 datasheet PDF. This datasheet also covers the MAX5910 variant, as both devices belong to the same +65v simple swapper hot-swap switches family and are provided as variant models within a single manufacturer datasheet.

General Description

The MAX5910/MAX5917 are fully integrated hot-swap switches for positive supply rails.

These devices allow the safe insertion and removal of circuit cards into live backplanes or ports without causing glitches on the backplane power-supply rail.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX5910_MaximIntegratedProducts.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5910 +65V Simple Swapper Hot-Swap Switches Maxim
MAX5911 -48V Simple Swapper Hot-Swap Switches Maxim
MAX5913 +48V Quad Hot-Swap Controllers Maxim
MAX5913A +48V Quad Hot-Swap Controllers Maxim Integrated Products
MAX5914A +48V Quad Hot-Swap Controllers Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX5912 -48V Simple Swapper Hot-Swap Switches
MAX5914 +48V Quad Hot-Swap Controllers
MAX5915A Dual PCI 2.2 Hot-Swap Controllers
MAX5916 Dual PCI 2.2 Hot-Swap Controllers
MAX5916A Dual PCI 2.2 Hot-Swap Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1706; Rev 0; 7/01 +65V Simple Swapper Hot-Swap Switches MAX5910/MAX5917 General Description The MAX5910/MAX5917 are fully integrated hot-swap switches for positive supply rails. These devices allow the safe insertion and removal of circuit cards into live backplanes or ports without causing glitches on the backplane power-supply rail. They also monitor various circuit parameters and disconnect the load if a fault condition occurs, alerting the host with a logic-level IFAULT output. The MAX5910/MAX5917 operate over a +10V to +65V input voltage range. They are designed to permit hot plugging of an internet appliance such as an IP phone but are not limited to that application.