Datasheet4U Logo Datasheet4U.com

MAX5932 - Hot-Swap Controller

General Description

The MAX5932 is a fully integrated hot-swap controller for +9V to +80V positive supply rails.

The MAX5932 allows for the safe insertion and removal of circuit cards into a live backplane without causing glitches on the backplane power-supply rail.

Key Features

  • a programmable foldback-current limit. If the device remains in current limit for more than a programmable time, the external n-channel MOSFET latches off. Other features include a programmable undervoltage lockout and a programmable output-voltage slew rate through an external n-channel MOSFET. The MAX5932 provides a power-good output (PWRGD) to indicate the status of the output voltage. For a variety of PWRGD/PWRGD, latch/autoretry-fault management, autoretry duty-cycle options, refer to the M.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX5930 Hot-Swap Controllers/ Power Sequencers/Voltage Trackers Maxim
MAX5933A Positive High-Voltage Hot-Swap Controllers Maxim Integrated Products
MAX5933B Positive High-Voltage Hot-Swap Controllers Maxim Integrated Products
MAX5933C Positive High-Voltage Hot-Swap Controllers Maxim Integrated Products
MAX5933D Positive High-Voltage Hot-Swap Controllers Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX5931 Hot-Swap Controllers/ Power Sequencers/Voltage Trackers
MAX5939 -48V Hot-Swap Controllers
MAX5901 -100V SOT23 Simple Swapper Hot-Swap Controllers
MAX5905 Low-Voltage / Dual Hot-Swap Controllers/Power Sequencers
MAX5906 Low-Voltage / Dual Hot-Swap Controllers/Power Sequencers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX5932 19-3264; Rev 0; 4/04 EVAALVUAAILTAIOBNLEKIT Positive High-Voltage, Hot-Swap Controller General Description The MAX5932 is a fully integrated hot-swap controller for +9V to +80V positive supply rails. The MAX5932 allows for the safe insertion and removal of circuit cards into a live backplane without causing glitches on the backplane power-supply rail. This device is pin and function compatible to LT1641-1. The MAX5932 features a programmable foldback-current limit. If the device remains in current limit for more than a programmable time, the external n-channel MOSFET latches off. Other features include a programmable undervoltage lockout and a programmable output-voltage slew rate through an external n-channel MOSFET.