MAX5953B Datasheet PDF | Maxim Integrated

Maxim Integrated MAX5953B

The MAX5953A/MAX5953B/MAX5953C/MAX5953D integrate a complete power IC solution for Powered Devices (PD) in a Power-Over-Ethernet (PoE) system, in compliance with the IEEE 802.3af standard. The MAX5953A/MAX5953B/MAX5953C/MAX5953D provide the PD with a detection signature, a classification signature, and an integrated isolation switch with programmable inrush current control. These devices also integrate a voltage-mode PWM controller with two power MOSFETs connected in a two-switch voltageclamped DC-DC converter configuration.

Part No.	MAX5953B
Datasheet	MAX5953B Download
Manufacturer	Maxim Integrated
Description	IEEE 802.3af PD Interface and PWM Controllers
Buy	Stock & Price

GENERAL DESCRIPTION

An integrated MOSFET provides PD isolation during detection and classification. All devices guarantee a leakage current offset of less than 10µA during the detection phase. A programmable current limit prevents high inrush current during power-on. The devices feature power-mode undervoltage lockout (UVLO) with wide hysteresis and long deglitch time to compensate for twisted-pair-cable resistive drop and to assure glitch-free transition between detection, classification, and power-on/-off phases. The MAX5953A/MAX5953C have an adjustable UVLO threshold with the default value compliant to the 802.3af standard, while the MAX5953B/MAX5953D have a lower and fixed UVLO threshold compatible with some legacy pre-802.3af power-sourcing equipment (PSE) devices. The DC-DC converters are operable in either forward or flyback configurations with a wide input voltage range from 11V to 76V and up to 15W of output power. The voltage-clamped power topology enables full recovery of stored magnetizing and leakage inductive energy for enhanced efficiency and reliability.