Datasheet4U Logo Datasheet4U.com

MAX6377 - Ultra-Low-Power SC70/SOT23 Voltage Detectors

Download the MAX6377 datasheet PDF. This datasheet also covers the MAX6375 variant, as both devices belong to the same ultra-low-power sc70/sot23 voltage detectors family and are provided as variant models within a single manufacturer datasheet.

General Description

The MAX6375

MAX6380 are ultra-low-power circuits used for monitoring battery, power-supply, and regulated system voltages.

Each detector contains a precision bandgap reference, comparator, and internally trimmed resistors that set specified trip threshold voltages.

Key Features

  • Ultra-Low 500nA Supply Current (MAX6375/MAX6376/MAX6377).
  • Thresholds Available from 2.20V to 4.63V in Approximately 100mV Increments.
  • ±2.5% Threshold Accuracy Over Temperature.
  • Low Cost.
  • Available in Three Versions: Push-Pull OUT, Push-Pull OUT, and Open-Drain OUT.
  • Power-Supply Transient Immunity.
  • No External Components.
  • Available in Either a 3-Pin SC70 or 3-Pin SOT23 Package Ordering Information PART.
  • TEMP RANGE PIN-.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX6375-MaximIntegrated.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX637 Preset/Adjustable Output CMOS Inverting Switching Regulators Maxim
MAX6371 Pin-Selectable Watchdog Timers Maxim
MAX6373 Pin-Selectable Watchdog Timers Maxim
MAX630 CMOS Micropower Step-UP Switching Regulator Maxim
MAX6301 Low-Power uP Supervisory Circuits Maxim

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX6370 Pin-Selectable Watchdog Timers
MAX6372 Pin-Selectable Watchdog Timers
MAX6374 Pin-Selectable Watchdog Timers
MAX6375 Ultra-Low-Power SC70/SOT23 Voltage Detectors
MAX6376 Ultra-Low-Power SC70/SOT23 Voltage Detectors

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1721; Rev 3; 12/05 MAX6375–MAX6380 3-Pin, Ultra-Low-Power SC70/SOT23 Voltage Detectors General Description The MAX6375–MAX6380 are ultra-low-power circuits used for monitoring battery, power-supply, and regulated system voltages. Each detector contains a precision bandgap reference, comparator, and internally trimmed resistors that set specified trip threshold voltages. These devices provide excellent circuit reliability and low cost by eliminating external components and adjustments when monitoring nominal system voltages from 2.5V to 5V. These circuits perform a single function: they assert an output signal whenever the VCC supply voltage falls below a preset threshold. The devices are differentiated by their output logic configurations and preset threshold voltages.