GENERAL DESCRIPTION
The MAX6625/MAX6626 combine a temperature sensor, a programmable overtemperature alarm, and an I2C-compatible serial interface into single compact packages. They convert their die temperatures into digital values using internal analogto-digital converters (ADCs). The result of the conversion is held in a temperature register, readable at any time through the serial interface. A dedicated alarm output, OT, activates if the conversion result exceeds the value programmed in the high-temperature register. A programmable fault queue sets the number of faults that must occur before the alarm activates, preventing spurious alarms in noisy environments. OT has programmable output polarity and operating modes. The MAX6625/MAX6626 feature a shutdown mode that saves power by turning off everything but the power-on reset and the I2C-compatible interface. Four separate addresses can be configured with the ADD pin, allowing up to four MAX6625/MAX6626 devices to be placed on the same bus.
Maxim Integrated
