MAX8621Z Datasheet PDF | Maxim Integrated

Maxim Integrated MAX8621Z

The MAX8621Y/MAX8621Z power-management integrated circuits (PMICs) are designed for a variety of portable devices including cellular handsets. These PMICs include two high-efficiency step-down DC-DC converters, four low-dropout linear regulators (LDOs) with pin-programmable capability, one open-drain driver, a 60ms (typ) reset timer, and power-on/off control logic. These devices offer high efficiency with a no-load supply current of 160µA, and their small thin QFN 4mm x 4mm package makes them ideal for portable devices.

Part No.	MAX8621Z
Datasheet	MAX8621Z Download
Manufacturer	Maxim Integrated
Description	Dual Step-Down DC-DC Power-Management ICs
Buy	Stock & Price

GENERAL DESCRIPTION

The step-down DC-DC converters utilize a proprietary 4MHz hysteretic-PWM control scheme that allows for ultra-small external components. Internal synchronous rectification improves efficiency and eliminates the external Schottky diode that is required in conventional step-down converters. The output voltage is adjustable from 0.6V to 3.3V. The output current is guaranteed up to 500mA. The four LDOs offer low 45µVRMS output noise and low dropout of only 100mV at 100mA. OUT1 and OUT2 deliver 300mA (min) of continuous output current. OUT3 and OUT4 deliver 150mA (min) of continuous output current. The output voltages are pin selectable by SEL1 and SEL2 for flexibility. The MAX8621Y/ MAX8621Z offer different sets of LDO output voltages. A microprocessor reset output (RESET) monitors OUT1 and warns the system of impending power loss, allowing safe shutdown. RESET asserts during power-up, power-down, shutdown, and fault conditions where VOUT1 is below its regulation voltage.