Datasheet4U Logo Datasheet4U.com

MAX9273 - 22-Bit GMSL Serializer

General Description

The MAX9273 compact serializer is designed to drive 50I coax or 100I shielded twisted-pair (STP) cable.

The device pairs with the MAX9272 deserializer.

The parallel input is programmable for single or double input.

Key Features

  • an embedded control channel that operates at 9.6kbps to 1Mbps in UART and mixed UART/ I2C modes, and up to 400kbps in I2C mode. Using the control channel, a microcontroller (FC) is capable of programming serializer, deserializer, and camera (or any peripheral) registers at any time, independent of video timing. There is one dedicated GPIO, four optional GPIOs, and a GPO output, allowing remote power-up of a camera module, camera frame synchronization, and other uses. Error-detection and correcti.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX9270 Gigabit Multimedia Deserializer Maxim Integrated Products
MAX9276 3.12Gbps GMSL Deserializers Maxim Integrated Products
MAX9277 3.12Gbps GMSL Serializers Maxim Integrated Products
MAX920 Beyond-the-Rails Comparators Maxim
MAX9201 Low-Power Voltage Comparators Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX9271 16-Bit GMSL Serializer
MAX9272 28-Bit GMSL Deserializer
MAX9272A 28-Bit GMSL Deserializer
MAX9275 3.12Gbps GMSL Serializers
MAX9278 3.12Gbps GMSL Deserializers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
EVALUATION KIT AVAILABLE MAX9273 22-Bit GMSL Serializer with Coax or STP Cable Drive General Description The MAX9273 compact serializer is designed to drive 50I coax or 100I shielded twisted-pair (STP) cable. The device pairs with the MAX9272 deserializer. The parallel input is programmable for single or double input. Double input allows higher pixel clock input frequency by registering two pixels of typical image-sensor video data before serializing. This doubles the maximum pixel clock frequency compared to single input. The device features an embedded control channel that operates at 9.6kbps to 1Mbps in UART and mixed UART/ I2C modes, and up to 400kbps in I2C mode.