GENERAL DESCRIPTION
To minimize output noise, both the headphone and speaker outputs utilize a downward expander/noise gate to attenuate noise when no desired input signal is present. The speaker output incorporates an adjustable dynamic range compressor (DRC) and distortion limiter to protect the speaker and maximize loudness. This allows high gain for low-level signals without compromising the quality of large signals. All controls are performed using the two-wire I2C interface. The IC operates in the extended -40NC to +85NC temperature range, and is available in the 2.0mm x 2.4mm, 20-bump WLP package (0.4mm pitch). S 2.7V to 5.5V Speaker Supply Voltage S 1.8V Headphone Supply Voltage S 1.0W Speaker Output (VPVDD = 4.2V, ZSPK = 8I + 68µH, 1% THD+N) S 32mW/Channel Headphone Output (RHP = 32I) S Active Emissions Limiting for Enhanced EMI Reduction S Efficient Class H Headphone Amplifier S Ground-Referenced Headphone Outputs S Headphone Ground Sense S 2 Stereo Single-Ended/Mono Differen...
Maxim Integrated
