Datasheet4U Logo Datasheet4U.com

MAX1007 - Mobile-Radio Analog Controller

General Description

The MAX1007 is a multifunctional integrated circuit designed for high-performance mobile radios.

Key Features

  • o Multi-Input 8-Bit ADC o Two 7-Bit DACs with Buffered Outputs o Two 6-Bit DACs: Buffered/Unbuffered o Power-Sense Conditioning Circuitry o RSSI Measurement o Antenna-Diversity Circuitry o Internal Reference o Serial-Logic Interface o +2.85V to +3.6V Single-Supply Operation o Two Shutdown Modes MAX1007 Ordering Information PART MAX1007CAG MAX1007EAG TEMP. RANGE 0°C to +70°C -40°C to +85°C PIN-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1020 Multichannel ADCs/DACs Maxim Integrated
MAX1022 Multichannel ADCs/DACs Maxim Integrated
MAX1026 10-Bit 300ksps ADCs Maxim Integrated Products
MAX1027 (MAX1027 - MAX1031) 10-Bit 300ksps ADCs Maxim Integrated Products
MAX1028 10-Bit 300ksps ADCs Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX100 250Msps / 8-Bit ADC with Track/Hold
MAX1002 Low-Power / 60Msps / Dual / 6-Bit ADC
MAX1003 Low-Power / 90Msps / Dual 6-Bit ADC
MAX1005 IF Undersampler
MAX101 500Msps / 8-Bit ADC with Track/Hold

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1180; Rev 0; 6/98 Mobile-Radio Analog Controller ________________General Description The MAX1007 is a multifunctional integrated circuit designed for high-performance mobile radios. It includes one 8-bit analog-to-digital converter (ADC), and two 7-bit and two 6-bit digital-to-analog converters (DACs) for functions including radio-frequency (RF) power sensing and antenna-diversity selection. The ADC provides for power sense, receive-signal strength intensity (RSSI) measurements and system supervision. In the power-sense mode, the ADC converts the power-sensing circuitry signal (representing either the transmitted (Tx) or received (Rx) RF power) into a digital code, ensuring optimum Tx power setting and Rx signal analysis.