Datasheet4U Logo Datasheet4U.com

MAX1180 - Low-Power ADC

Description

The MAX1180 is a 3.3V, dual 10-bit, analog-to-digital converter (ADC) featuring fully-differential wideband track-and-hold (T/H) inputs, driving two pipelined, ninestage ADCs.

Features

  • a 2.8mA sleep mode, as well as a 1µA power-down mode to conserve power during idle periods. An internal 2.048V preci.

📥 Download Datasheet

Datasheet preview – MAX1180

Datasheet Details

Part number MAX1180
Manufacturer Maxim
File Size 499.16 KB
Description Low-Power ADC
Datasheet download datasheet MAX1180 Datasheet
Additional preview pages of the MAX1180 datasheet.

📁 Similar Datasheet

  • MAX11800 - (MAX11800 - MAX11803) Ultra-Small Resistive Touch-Screen Controllers (Maxim Integrated Products)
  • MAX11801 - (MAX11800 - MAX11803) Ultra-Small Resistive Touch-Screen Controllers (Maxim Integrated Products)
  • MAX11802 - (MAX11800 - MAX11803) Ultra-Small Resistive Touch-Screen Controllers (Maxim Integrated Products)
  • MAX11803 - (MAX11800 - MAX11803) Ultra-Small Resistive Touch-Screen Controllers (Maxim Integrated Products)
  • MAX1181 - Low-Power ADC (Maxim Integrated Products)
  • MAX1182 - Low-Power ADC (Maxim Integrated Products)
  • MAX1184 - Low-Power ADC (Maxim Integrated Products)
  • MAX1186 - Low-Power ADC (Maxim Integrated Products)
  • MAX11014 - Automatic RF MESFET Amplifier Drain-Current Controllers (Maxim Integrated Products)
  • MAX11015 - Automatic RF MESFET Amplifier Drain-Current Controllers (Maxim Integrated Products)
Other Datasheets by Maxim
  • MAX118 - +5V / 1Msps / 4 & 8-Channel / 8-Bit ADCs
  • MAX1183 - Low-Power ADC
  • MAX1185 - Low-Power ADC
  • MAX1187 - 16-Bit / 135ksps / Single-Supply ADCs
  • MAX1189 - 16-Bit / 135ksps / Single-Supply ADCs
  • MAX110 - Low-Cost / 2-Channel / 14-Bit Serial ADCs
  • MAX1101 - Single-Chip / 8-Bit CCD Digitizer
  • MAX1102 - 8-Bit CODECs

Full PDF Text Transcription

Click to expand full text
19-2097; Rev 1; 2/07 EVAALVUAAILTAIOBNLEKIT Dual 10-Bit, 105Msps, 3.3V, Low-Power ADC with Internal Reference and Parallel Outputs MAX1180 General Description The MAX1180 is a 3.3V, dual 10-bit, analog-to-digital converter (ADC) featuring fully-differential wideband track-and-hold (T/H) inputs, driving two pipelined, ninestage ADCs. The MAX1180 is optimized for low-power, high-dynamic performance applications in imaging, instrumentation, and digital communication applications. The MAX1180 operates from a single 2.7V to 3.6V supply, consuming only 413mW, while delivering a typical signal-to-noise ratio (SNR) of 58.5dB at an input frequency of 20MHz and a sampling rate of 105Msps. The T/H driven input stages incorporate 400MHz (-3dB) input amplifiers.
Published: |