Datasheet4U Logo Datasheet4U.com

MAX1190 - Low-Power ADC

General Description

The MAX1190 is a 3.3V, dual 10-bit analog-to-digital converter (ADC) featuring fully differential wideband trackand-hold (T/H) inputs, driving two ADCs.

Key Features

  • a 3mA sleep mode, as well as a 1µA power-down mode to conserve power during idle periods. An internal 2.048V precision bandgap reference sets the full.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX11900 Fully Differential SAR ADC Maxim Integrated
MAX11901 Fully Differential SAR ADC Maxim Integrated
MAX11902 Fully Differential SAR ADC Maxim Integrated Products
MAX11903 Fully Differential SAR ADC Maxim Integrated
MAX11904 Fully Differential SAR ADC Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX11905 Fully Differential SAR ADC
MAX1192 Dual 8-Bit ADC
MAX1196 Dual 8-Bit / 40Msps / 3V / Low-Power ADC with Internal Reference and Multiplexed Parallel Outputs
MAX1198 Dual / 8-Bit / 100Msps / 3.3V / Low-Power ADC
MAX110 Low-Cost / 2-Channel / 14-Bit Serial ADCs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-2524; Rev 1; 6/06 MAX1190 Dual 10-Bit, 120Msps, 3.3V, Low-Power ADC with Internal Reference and Parallel Outputs General Description The MAX1190 is a 3.3V, dual 10-bit analog-to-digital converter (ADC) featuring fully differential wideband trackand-hold (T/H) inputs, driving two ADCs. The MAX1190 is optimized for low power, small size, and high-dynamic performance for applications in imaging, instrumentation, and digital communications. This ADC operates from a single 3.1V to 3.6V supply, consuming only 492mW while delivering a typical signal-to-noise and distortion (SINAD) of 57dB at an input frequency of 60MHz and a sampling rate of 120Msps. The T/H driven input stages incorporate 400MHz (-3dB) input amplifiers. The converters can also be operated with single-ended inputs.