Datasheet4U Logo Datasheet4U.com

MAX1204 - 5V / 8-CHANNEL / SERIAL / 10-BIT ADC

General Description

The MAX1204 is a 10-bit data-acquisition system specifically designed for use in applications with mixed +5V (analog) and +3V (digital) supply voltages.

Key Features

  • an internal 4.096V reference and a reference-buffer amplifier that simplifies gain trim. It also has a VL pin that supplies power to the digital outputs. Output logic levels (3V, 3.3V, or 5V) are determined by the value of the voltage applied to this pin. A hard-wired SHDN pin and two software-selectable power-down modes are provided. Accessing the serial interface automatically powers up the device. A quick turn-on time allows the MAX1204 to be shut down between conversions, enabling the user t.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX12000 1575MHz GPS Front-End Amplifier Maxim Integrated Products
MAX12005 Satellite IF Switch Maxim Integrated Products
MAX1202 12-Bit ADCs Maxim Integrated
MAX1213 170Msps ADC Maxim Integrated Products
MAX1219 Broadband Applications Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX120 500ksps / 12-Bit ADCs
MAX1200 16-Bit Self-Calibrating ADC
MAX1201 14-Bit Self-Calibrating ADC
MAX1203 12-Bit ADCs
MAX1205 14-Bit Self-Calibrating ADC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1179; Rev 0; 1/97 5V, 8-Channel, Serial, 10-Bit ADC with 3V Digital Interface _______________General Description The MAX1204 is a 10-bit data-acquisition system specifically designed for use in applications with mixed +5V (analog) and +3V (digital) supply voltages. It operates with a single +5V analog supply or dual ±5V analog supplies, and combines an 8-channel multiplexer, internal track/hold, and serial interface with high conversion speed and low power consumption. A 4-wire serial interface connects directly to SPI™/Microwire™ devices without external logic, and a serial strobe output allows direct connection to TMS320-family digital signal processors.