Datasheet4U Logo Datasheet4U.com

MAX1403 - +3V / 18-Bit / Low-Power / Multichannel / Oversampling Sigma-Delta ADC

Key Features

  • o 18-Bit Resolution, Sigma-Delta ADC o 16-Bit Accuracy with No Missing Codes to 480sps o Matched On-Board Current Sources (200µA) for Sensor Excitation o Low Quiescent Current 250µA (operating mode) 2µA (power-down mode) o 3 Fully Differential or 5 Pseudo-Differential Signal Input Channels o 2 Additional, Fully Differential Calibration Channels/Auxiliary Input Channels o Programmable Gain and Offset o Fully Differential Reference Inputs o Converts Continuously or On Command o Automatic Channel S.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX14001 Isolated 10-bit ADCs Maxim Integrated
MAX14002 Isolated 10-bit ADCs Maxim Integrated
MAX1408 16-Bit Multichannel DAS Maxim Integrated
MAX1409 16-Bit Multichannel DAS Maxim Integrated
MAX14130 4-Channel Digital Isolators Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX140 3 1/2 Digit A/D Converters
MAX1400 Oversampling (Sigma-Delta) ADC
MAX1401 #V / 18-Bit / Low-Power / Multichannel / Oversampling Sigma-Delta ADC
MAX1402 +5V / 18-Bit / Low-Power / Multichannel / Oversampling Sigma-Delta ADC
MAX1406 15kV ESD-Protected / EMC-Compliant / 230kbps / 3-Tx/3-Rx RS-232 IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1481; Rev 0; 4/99 KIT ATION EVALU E L B A AVAIL +3V, 18-Bit, Low-Power, Multichannel, Oversampling (Sigma-Delta) ADC General Description Features o 18-Bit Resolution, Sigma-Delta ADC o 16-Bit Accuracy with No Missing Codes to 480sps o Matched On-Board Current Sources (200µA) for Sensor Excitation o Low Quiescent Current 250µA (operating mode) 2µA (power-down mode) o 3 Fully Differential or 5 Pseudo-Differential Signal Input Channels o 2 Additional, Fully Differential Calibration Channels/Auxiliary Input Channels o Programmable Gain and Offset o Fully Differential Reference Inputs o Converts Continuously or On Command o Automatic Channel Scanning and Continuous Data Output Mode o Operates with Analog and Digital Supplies from +2.7V to +3.