Datasheet4U Logo Datasheet4U.com

MAX14777 - Quad Beyond-the-Rails -15V to +35V Analog Switch

General Description

The MAX14777 quad SPST switch supports analog signals above and below the rails with a single 3.0V to 5.5V supply.

Key Features

  • a selectable -15V/+35V or -15V/+15V analog signal range for all switches. Each switch has a separate control input to allow independent switching, making the device an alternative to opto-relays in.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX14770E High-ESD Profibus RS-485 Transceiver Maxim Integrated Products
MAX1471 3V/5V ASK/FSK Superheterodyne Receiver Maxim Integrated Products
MAX14720 Power-Management Solution Maxim Integrated
MAX14724 Serial-Controlled 8:4 Matrix Switch Multiplexer Maxim Integrated
MAX1473 ASK Superheterodyne Receiver Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX14778 Dual +-25V Above- and Below-the-Rails 4:1 Analog Multiplexer
MAX147 +2.7Low-Power / 8-Channel / Serial 12-Bit ADCs
MAX1470 315MHz Low-Power / +3V Superheterodyne Receiver
MAX1472 Crystal-Based ASK Transmitter
MAX1478 1% Accurate / Digitally Trimmed /Rail-to-Rail Sensor Signal Conditioner

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX14777 Quad Beyond-the-Rails -15V to +35V Analog Switch General Description The MAX14777 quad SPST switch supports analog signals above and below the rails with a single 3.0V to 5.5V supply. The device features a selectable -15V/+35V or -15V/+15V analog signal range for all switches. Each switch has a separate control input to allow independent switching, making the device an alternative to opto-relays in applications that do not need galvanic isolation. The IC features 10Ω (max) on-resistance, and 9mΩ (typ) RON flatness, along with a low 50nA (max at +85°C) onleakage. For maximum signal integrity, the device keeps this performance over the entire common-mode voltage range. Each switch can carry up to 60mA (max) of continuous current in either direction.