Datasheet4U Logo Datasheet4U.com

MAX1492 - Single-Chip ADCs

General Description

The MAX1492/MAX1494 low-power, 3.5- and 4.5-digit, analog-to-digital converters (ADCs) with integrated liquid crystal display (LCD) drivers operate from a single 2.7V to 5.25V power supply.

They include an internal reference, a high-accuracy on-chip oscillator, and a triplexed LCD driver.

Key Features

  • include data hold and peak hold, overrange and underrange detection, and a lowbattery monitor. The MAX1494 comes in a 32-pin, 7mm x 7mm LQFP package, and the MAX1492 comes in 28-pin SSOP and 28-pin PDIP packages. All devices in this family operate over the 0°C to +70°C commercial temperature range. Digital Panel Meters Hand-Held Meters Digital Voltmeters Digital Multimeters.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX14920 (MAX14920 / MAX14921) High-Accuracy 12-/16-Cell Measurement AFEs Maxim Integrated
MAX14921 (MAX14920 / MAX14921) High-Accuracy 12-/16-Cell Measurement AFEs Maxim Integrated
MAX14900E Octal Power Switch Maxim Integrated
MAX14906 Digital I/O Maxim Integrated
MAX1490E (MAX1480E / MAX1490E) Isolated RS-485/RS-422 Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX149 +2.7V to +5.25V / Low-Power / 8-Channel / Serial 10-Bit ADCs
MAX1490A Complete / Isolated RS-485/RS-422 Data Interface
MAX1490B Complete / Isolated RS-485/RS-422 Data Interface
MAX1491 3.5- and 4.5-Digit / Single-Chip ADCs
MAX1493 3.5- and 4.5-Digit / Single-Chip ADCs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX1492/MAX1494 19-2959; Rev 4; 7/10 EVAALVUAAILTAIOBNLEKIT 3.5- and 4.5-Digit, Single-Chip ADCs with LCD Drivers General Description The MAX1492/MAX1494 low-power, 3.5- and 4.5-digit, analog-to-digital converters (ADCs) with integrated liquid crystal display (LCD) drivers operate from a single 2.7V to 5.25V power supply. They include an internal reference, a high-accuracy on-chip oscillator, and a triplexed LCD driver. An internal charge pump generates the negative supply needed to power the integrated input buffer for single-supply operation. The ADCs are configurable for either a ±2V or ±200mV input range and outputs its conversion results to an LCD and/or to a microcontroller (µC). µC communication is facilitated through an SPI™-/QSPI™-/MICROWIRE®-compatible serial interface.