Datasheet4U Logo Datasheet4U.com

MAX1561 - High-Efficiency / 26V Step-Up Converters for Two to Six White LEDs

General Description

The MAX1561/MAX1599 step-up converters drive up to six white LEDs with a constant current to provide backlight in cell phones, PDAs, and other hand-held devices.

The step-up converter topology allows series connection of the white LEDs so the LED currents are identical for uniform brightness.

Key Features

  • o Accurate Current Regulation for Uniform Illumination o High Efficiency Up to 87% o Flexible Analog or PWM Dimming Control o Up to 900mW Output Power with Internal 30V MOSFET Switch o Fast 1MHz (MAX1561) or 500kHz (MAX1599) PWM Operation o Small, Low-Profile External Components o 2.6V to 5.5V Input Range o 26V (max) Output with Overvoltage Protection o Optimized for Low 15mVP-P Input Ripple o Soft-Start with Zero Inrush Current o 0.3µA Shutdown Current o Tiny 8-Pin 3mm x 3mm Thin DFN Package M.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1562H Programmable 4A USB Current-Limited Switches Maxim Integrated
MAX1563 Programmable 4A USB Current-Limited Switches Maxim Integrated
MAX15000 Current-Mode PWM Controllers Maxim Integrated Products
MAX15001 Current-Mode PWM Controllers Maxim Integrated Products
MAX15002 Dual-Output Buck Controller Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX156 8-/4-Channel ADCs
MAX1562 Programmable 4A USB Current-Limited Switches
MAX1565 Small / High-Efficiency / Five-Channel Digital Still Camera Power Supply
MAX1566 Six-Channel / High-Efficiency / Digital Camera Power Supplies
MAX1567 Six-Channel / High-Efficiency / Digital Camera Power Supplies

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-2731; Rev 1; 10/03 KIT ATION EVALU E L B A AVAIL High-Efficiency, 26V Step-Up Converters for Two to Six White LEDs General Description The MAX1561/MAX1599 step-up converters drive up to six white LEDs with a constant current to provide backlight in cell phones, PDAs, and other hand-held devices. The step-up converter topology allows series connection of the white LEDs so the LED currents are identical for uniform brightness. This configuration eliminates the need for ballast resistors and expensive factory calibration. The MAX1561/MAX1599 include an internal, high-voltage, low-RDS(ON) N-channel MOSFET switch for high efficiency and maximum battery life. A single Dual Mode™ input provides a simple means of brightness adjustment and on/off control.