Datasheet4U Logo Datasheet4U.com

MAX1602 - Single-Channel CardBus and PCMCIA VCC/VPP Power-Switching Network

General Description

The MAX1602 DC power-switching IC contains a network of low-resistance MOSFET switches that deliver selectable VCC and VPP voltages to a single CardBus or PC Card host socket.

Key Features

  • include lowresistance switches, small packaging, soft-switching action, and compliance with PCMCIA specifications for 3V/5V switching. 3.3V-only power switching for fast, 32-bit CardBus.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX16020 (MAX160xx) Low-Power uP Supervisory Circuits Maxim Integrated Products
MAX16021 (MAX160xx) Low-Power uP Supervisory Circuits Maxim Integrated Products
MAX16023 Battery-Backup Circuits Maxim Integrated Products
MAX16024 Battery-Backup Circuits Maxim Integrated Products
MAX16025 Sequencing/Supervisory Circuits Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX160 uP Compatible 8 Bit A/D Converter
MAX1600 Dual-Channel CardBus and PCMCIA VCC/VPP Power-Switching Networks
MAX1601 Dual-Channel CardBus and PCMCIA Power Switches with SMBus Serial Interface
MAX1603 Dual-Channel CardBus and PCMCIA VCC/VPP Power-Switching Networks
MAX1604 Dual-Channel CardBus and PCMCIA Power Switches with SMBus Serial Interface

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1125; Rev 0; 9/96 Single-Channel CardBus and PCMCIA VCC/VPP Power-Switching Network _______________General Description The MAX1602 DC power-switching IC contains a network of low-resistance MOSFET switches that deliver selectable VCC and VPP voltages to a single CardBus or PC Card host socket. Key features include lowresistance switches, small packaging, soft-switching action, and compliance with PCMCIA specifications for 3V/5V switching. 3.3V-only power switching for fast, 32-bit CardBus applications is supported in two ways: low-resistance 3.3V switches allow high 3.3V load currents (up to 1A); and completely independent internal charge pumps let the 3.3V switch operate normally, even if the +5V and +12V supplies are disconnected or turned off to conserve power.