Datasheet4U Logo Datasheet4U.com

MAX1610 - Digitally Controlled CCFL Backlight Power Supplies

General Description

The MAX1610/MAX1611 are fully integrated, highefficiency drivers for cold-cathode fluorescent lamps (CCFLs).

They operate from a 4.5V to 26V power source.

An on-board, high-switching-frequency power MOSFET reduces external component count and magnetics size.

Key Features

  • _______________General.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX16122 Dual Pushbutton Controllers Maxim Integrated
MAX16123 Dual Pushbutton Controllers Maxim Integrated
MAX16124 Dual Pushbutton Controllers Maxim Integrated
MAX16125 Dual Pushbutton Controllers Maxim Integrated
MAX16126 Load-Dump/Reverse-Voltage Protector Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX161 CMOS 8-Bit 8Channel Data Acquisition System
MAX1611 Digitally Controlled CCFL Backlight Power Supplies
MAX1612 Bridge-Battery Backup Controller
MAX1613 Bridge-Battery Backup Controller
MAX1614 High-Side / N-Channel MOSFET Switch Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1128; Rev 0; 9/96 KIT ATION EVALU E L B A AVAIL Digitally Controlled CCFL Backlight Power Supplies ____________________________Features _______________General Description The MAX1610/MAX1611 are fully integrated, highefficiency drivers for cold-cathode fluorescent lamps (CCFLs). They operate from a 4.5V to 26V power source. An on-board, high-switching-frequency power MOSFET reduces external component count and magnetics size. The MAX1610/MAX1611 protect against open or shorted lamps. The CCFL can be driven from an isolated transformer secondary winding to improve efficiency and avoid flicker at dim tube settings. Brightness is adjusted by scaling the lamp current, or by operating with a fixed lamp current and chopping the CCFL on and off at a rate faster than the eye can detect.