Datasheet4U Logo Datasheet4U.com

MAX1693 - USB Current-Limited Switches

General Description

The MAX1693/MAX1694 are current-limited, 60m Ω switches with built-in fault blanking.

Their accurate preset current limit of 0.7A to 1.0A makes them ideally suited for USB applications.

Key Features

  • to ensure that the USB port is protected. Built-in thermaloverload protection limits power dissipation and junction temperatures. Both devices have accurate internal current-limiting circuitry to protect the input supply against overload. They are available in space-saving 10-pin µMAX packages. Features o Accurate Current Limit (0.7A min, 1.0A max) o Guaranteed 0.75A Short-Circuit Protection o 10ms Internal Fault-Blanking Timeout o No Fault Signal During Power-Up o Latched FAULT Output Turns Of.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX16930 (MAX16930 / MAX16931) Dual Buck Maxim Integrated
MAX16931 (MAX16930 / MAX16931) Dual Buck Maxim Integrated
MAX16935 2.2MHz Step-Down Converters Maxim Integrated
MAX16936 Step-Down Converter Maxim Integrated
MAX16939 2.2MHz Step-Down Converters Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX1692 Low-Noise / 5.5V-Input / PWM Step-Down Regulator
MAX1694 USB Current-Limited Switches
MAX1697 60mA / SOT23 Inverting Charge Pump with Shutdown
MAX1698 High-Efficiency Step-Up Current Regulator
MAX160 uP Compatible 8 Bit A/D Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1518; Rev 0; 9/99 USB Current-Limited Switches with Fault Blanking General Description The MAX1693/MAX1694 are current-limited, 60m Ω switches with built-in fault blanking. Their accurate preset current limit of 0.7A to 1.0A makes them ideally suited for USB applications. Their low quiescent supply current (14µA) and shutdown current (1µA) conserve battery power in portable applications. The MAX1693/ MAX1694 operate with inputs from +2.7V to +5.5V, making them ideal for both +3V and +5V systems. A fault signal notifies the microprocessor that the internal current limit has been reached. A 10ms fault-blanking feature allows momentary faults (such as those caused when hot-swapping into a capacitive load) to be ignored, thus preventing false alarms to the host system.