Datasheet4U Logo Datasheet4U.com

MAX17506 - Synchronous Step-Down DC-DC Converter

General Description

The MAX17506 high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated high-side MOSFET operates over a 4.5V to 60V input.

The converter can deliver up to 5A and generates output voltages from 0.9V up to 0.9 x VIN.

Key Features

  • Reduces External Components and Total Cost.
  • No Schottky-Synchronous Operation.
  • Internal Compensation for Any Output Voltage.
  • Built-In Soft-Start.
  • All-Ceramic Capacitors, Compact Layout.
  • Reduce Number of DC-DC Regulators to Stock.
  • Wide 4.5V to 60V Input.
  • Adjustable 0.9V to 0.9 x VIN Output.
  • 100kHz to 2.2MHz Adjustable Switching Frequency with External Synchronization.
  • Reduces Power Dissipation.
  • Peak.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX17500 Current-Mode PWM Controllers Maxim Integrated Products
MAX17505 1.7A Synchronous Step-Down DC-DC Converter Maxim Integrated
MAX17509 Synchronous Step-Down DC-DC Converter Maxim Integrated
MAX17510 Low-Voltage DDR Linear Regulators Maxim Integrated
MAX17511 3-/2-/1-Phase + 2-/1-Phase Quick-PWM Controllers Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX17501 Synchronous Step-Down DC-DC Converter
MAX17502 Synchronous Step-Down DC-DC Converter
MAX17503 Synchronous Step-Down DC-DC Converter
MAX1755 SOT23 Local Temperature Comparators
MAX17552 Synchronous Step-Down DC-DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
MAX17506 4.5V–60V, 5A, High-Efficiency, Synchronous Step-Down DC-DC Converter with Internal Compensation General Description The MAX17506 high-efficiency, high-voltage, synchronous step-down DC-DC converter with integrated high-side MOSFET operates over a 4.5V to 60V input. The converter can deliver up to 5A and generates output voltages from 0.9V up to 0.9 x VIN. The feedback (FB) voltage is accurate to within ±1.4% over -40°C to 125°C. The MAX17506 uses peak current-mode control. The device can be operated in the pulse-width modulation (PWM), pulse-frequency modulation (PFM), and discontinuous conduction mode (DCM) control schemes. The device is available in a 20-pin (5mm x 5mm) Thin QFN (TQFN) package. Simulation models are available.