Datasheet4U Logo Datasheet4U.com

MAX1802 - Digital Camera Step-Down Power Supply

General Description

The MAX1802 provides a complete power-supply solution for digital still cameras and video cameras by integrating two high-efficiency step-down DC-DC converters and three auxiliary step-up controllers.

Key Features

  • expandability by supplying power, an oscillator signal, and a reference to the MAX1801, a low-cost slave DC-DC controller that supports step-up, single-ended primary inductance converter (SEPIC), and fly-back configurations. The MAX1802 is available in a space-saving 32-pin TQFP package (5mm x 5mm body), and the MAX1801 is available in an 8-pin SOT-23 package. An evaluation kit (MAX1802EVKIT) featuring both devices is available to expedite designs. o 2.5V to 11V Input Voltage Range o Main DC-DC.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX18000 500mV to 5.5V Input nanoPower Boost Converter Analog Devices
MAX1806 Low-Voltage Linear Regulator Maxim Integrated
MAX1820 WCDMA Cellular Phone 600mA Buck Regulators Maxim Integrated Products
MAX1821 WCDMA Cellular Phone 600mA Buck Regulators Maxim Integrated Products
MAX1823 Dual USB Switch Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX180 Complete / 8-Channel / 12-Bit Data-Acquisition Systems
MAX1800 Digital Camera Step-Up Power Supply
MAX1804 External Four-Input Feedback Integrator for Power Supplies
MAX1805 Multichannel Remote / Local Temperature Sensor
MAX1809 3A / 1MHz / DDR Memory Termination Supply

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1850; Rev 0; 10/00 Digital Camera Step-Down Power Supply General Description The MAX1802 provides a complete power-supply solution for digital still cameras and video cameras by integrating two high-efficiency step-down DC-DC converters and three auxiliary step-up controllers. This complete solution is targeted for applications that use either three to four alkaline cells or two lithium-ion (Li+) cells. The main step-down DC-DC controller accepts inputs from 2.5V to 11V and regulates a resistor-adjustable output from 2.7V to 5.5V. It uses a synchronous rectifier to regulate the output with up to 94% efficiency. An adjustable operating frequency (up to 1MHz) facilitates designs for optimum size, cost, and efficiency. The core step-down DC-DC converter accepts inputs from 2.7V to 5.