Datasheet4U Logo Datasheet4U.com

MAX1810 - Network Interface Card Smart Regulator

General Description

The MAX1810 powers peripheral component interconnect (PCI) Ethernet network interface cards (NICs), modem cards, and other devices that utilize both the main and auxiliary (standby) voltages supplied by PCIcompliant systems.

Key Features

  • MAX1810 ________________________.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX18000 500mV to 5.5V Input nanoPower Boost Converter Analog Devices
MAX1806 Low-Voltage Linear Regulator Maxim Integrated
MAX1820 WCDMA Cellular Phone 600mA Buck Regulators Maxim Integrated Products
MAX1821 WCDMA Cellular Phone 600mA Buck Regulators Maxim Integrated Products
MAX1823 Dual USB Switch Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX181 Network Interface Card Smart Regulator
MAX1811 USB-Powered Li+ Charger
MAX1812 Dual USB Switch with Fault Blanking
MAX1813 Dynamically-Adjustable / Synchronous Step-Down Controller with Integrated Voltage Positioning
MAX1816 Dual Step-Down Controllers Plus Linear Regulator Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1678; Rev 0; 4/00 Network Interface Card Smart Regulator General Description The MAX1810 powers peripheral component interconnect (PCI) Ethernet network interface cards (NICs), modem cards, and other devices that utilize both the main and auxiliary (standby) voltages supplied by PCIcompliant systems. The device generates an uninterrupted +3.3V at up to 500mA from either a +5V main or a +5V standby supply. When both +5V inputs fall below +4.1V, an internal switch connects the +3.3V auxiliary input to the output. An auxiliary switch resistance of only 0.18Ω minimizes output droop from the +3.3V auxiliary supply.