Datasheet4U Logo Datasheet4U.com

MAX1972 - Dual / 180 Out-of-Phase / 1.4MHz / 750mA Step-Down Regulator

This page provides the datasheet information for the MAX1972, a member of the MAX1971 Dual / 180 Out-of-Phase / 1.4MHz / 750mA Step-Down Regulator family.

Datasheet Summary

Description

The MAX1970/MAX1971/MAX1972 dual-output currentmode PWM buck regulators operate from 2.6V to 5.5V input and deliver a minimum of 750mA on each output.

The MAX1970 and MAX1972 operate at a fixed 1.4MHz (MAX1971 operates at 700kHz) to reduce output inductor and capacitor size and cost.

Features

  • o Current-Mode, 1.4MHz Fixed-Frequency PWM Operation o 180° Out-of-Phase Operation Reduces Input Capacitor o ±1% Output Accuracy Over Load, Line, and Temperature Ranges o 750mA Guaranteed Output Current o 2.6V to 5.5V Input o Power-On Reset Delay of 16.6ms (MAX1970) or 175ms (MAX1971 and MAX1972) o Power-Fail Output (MAX1970 and MAX1972 Only) o Power-On Reset Input (MAX1971 Only) o Operation Outside xDSL Band o Ultra-Compact Design with Smallest External Components o Outputs Adjustable from 0.8V.

📥 Download Datasheet

Datasheet preview – MAX1972

Datasheet Details

Part number MAX1972
Manufacturer Maxim
File Size 267.86 KB
Description Dual / 180 Out-of-Phase / 1.4MHz / 750mA Step-Down Regulator
Datasheet download datasheet MAX1972 Datasheet
Additional preview pages of the MAX1972 datasheet.
Other Datasheets by Maxim

Full PDF Text Transcription

Click to expand full text
19-2297; Rev 0; 1/02 Dual, 180° Out-of-Phase, 1.4MHz, 750mA StepDown Regulator with POR and RSI/PFO General Description The MAX1970/MAX1971/MAX1972 dual-output currentmode PWM buck regulators operate from 2.6V to 5.5V input and deliver a minimum of 750mA on each output. The MAX1970 and MAX1972 operate at a fixed 1.4MHz (MAX1971 operates at 700kHz) to reduce output inductor and capacitor size and cost. Switching the regulators 180° out-of-phase also reduces the input capacitor size and cost. Ceramic capacitors can be used for input and output. The output voltages are programmable from 1.2V to VIN using external feedback resistors, or can be preset to 1.8V or 3.3V for output 1 and 1.5V or 2.5V for output 2. When one output is higher than 1.
Published: |