Datasheet4U Logo Datasheet4U.com

MAX1976 - Low-Input-Voltage / 300mA LDO Regulators with RESETin SOT and TDFN

General Description

The MAX1963/MAX1976 low-dropout linear regulators operate from a +1.62V to +3.6V supply and deliver a guaranteed 300mA continuous load current with a low 100mV dropout.

The high-accuracy (±0.5%) output voltage is preset to an internally trimmed voltage in the +0.75V to +3.0V range.

Key Features

  • include logic-controlled shutdown, short-circuit protection, and thermal-overload protection. o Low 1.62V Minimum Input Voltage o Guaranteed 300mA Output Current o ±1.5% Accuracy Over Load/Line/Temp o Low 100mV Dropout at 300mA Load o 2.2ms (MAX1963) or 70ms (MAX1976) RESET Output Flag o Supply Current Independent of Load and Dropout Voltage o Logic-Controlled Shutdown o Thermal-Overload and Short-Circuit Protection o Preset Output Voltages (0.75V to 3.0V) o Tiny 6-Pin Thin SOT23 Package (.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX1976A 300mA LDO Regulators Maxim Integrated
MAX19707 Ultra-Low-Power Analog Front-End Maxim Integrated Products
MAX1979 Integrated Temperature Controllers Maxim Integrated
MAX19790 Analog Voltage Variable Attenuator Maxim Integrated
MAX19005 200Mbps ATE Drivers/Comparators Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX197 12-Bit DAS
MAX1970 Dual / 180 Out-of-Phase / 1.4MHz / 750mA Step- Down Regulator
MAX19700 Ultra-Low-Power Analog Front-End
MAX19705 Ultra-Low-Power Analog Front-End
MAX19706 Ultra-Low-Power Analog Front-End

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3040; Rev 0; 10/03 Low-Input-Voltage, 300mA LDO Regulators with RESET in SOT and TDFN General Description The MAX1963/MAX1976 low-dropout linear regulators operate from a +1.62V to +3.6V supply and deliver a guaranteed 300mA continuous load current with a low 100mV dropout. The high-accuracy (±0.5%) output voltage is preset to an internally trimmed voltage in the +0.75V to +3.0V range. An active-low, open-drain reset output remains asserted for at least 2.2ms (MAX1963) or 70ms (MAX1976) after the output voltage reaches regulation. These devices are offered in 6-pin thin SOT23 and 6-pin 3mm x 3mm thin DFN packages.