MAX2310 Datasheet | Maxim Integrated

Description The MAX2310/MAX2312/MAX2314/MAX2316 are IF receivers designed for dual-band, dual-mode, and single-mode N-CDMA and W-CDMA cellular phone systems. The signal path consists of a variable gain amplifier (VGA) and I/Q demodulator. The devices feature guaranteed +2.7V operation, a dynamic range of over 110d B, and high input IP3 (-33d Bm at 35d B gain, 1.7d Bm at -35d B). Unlike similar devices, the MAX2310 family of receivers includes dual oscillators and synthesizers to form a self-contained IF subsystem. The synthesizer’s reference and RF dividers are fully programmable through a 3-wire serial bus, enabling dual-band system architectures using any mon reference and IF frequency. The differential baseband outputs have enough bandwidth to suit both N-CDMA and W-CDMA systems, and offer saturated output levels of 2.7Vp-p at a low +2.75V supply voltage. Including the low-noise voltage-controlled oscillator (VCO) and synthesizer, the MAX2310 draws only 26m A from a +2.75V supply in CDMA (differential IF) mode. The MAX2310/MAX2312/MAX2314/MAX2316 are available in 28-pin QSOP packages. Applications Single/Dual/Triple-Mode CDMA Handsets Globalstar Dual-Mode Handsets Wireless Data Links Tetra Direct-Conversion Receivers Wireless Local Loop (WLL) Features - plete IF Subsystem Includes VCO and Synthesizer - Supports Dual-Band, Triple-Mode Operation - VGA with >110d B Gain Control - Quadrature Demodulator - High Output Level (2.7V) - Programmable Charge-Pump Current - Supports Any IF Frequency Between 40MHz and 300MHz - 3-Wire Programmable Interface - Low Supply Voltage (+2.7V) Ordering Information PART MAX2310EEI MAX2312EEI MAX2314EEI MAX2316EEI TEMP RANGE -40°C to +85°C -40°C to +85°C -40°C to +85°C -40°C to +85°C PIN-PACKAGE 28 QSOP 28 QSOP 28 QSOP 28 QSOP Pin Configurations appear at end of data sheet. Block Diagram appears at end of data sheet. Selector Guide PART MAX2310 MAX2312 MAX2314 MAX2316 MODE AMPS, Cellular CDMA, PCS CDMA PCS CDMA AMPS, Cellular...