Datasheet4U Logo Datasheet4U.com

MAX2620 - 10MHz to 1050MHz Integrated RF Oscillator

General Description

The MAX2620 combines a low-noise oscillator with two output buffers in a low-cost, plastic surface-mount, ultra-small µMAX package.

This device integrates functions typically achieved with discrete components.

Key Features

  • Low-Phase-Noise Oscillator: -110dBc/Hz (25kHz offset from carrier) Attainable.
  • Operates from Single +2.7V to +5.25V Supply.
  • Low-Cost Silicon Bipolar Design.
  • Two Output Buffers Provide Load Isolation.
  • Insensitive to Supply Variations.
  • Low, 27mW Power Consumption (VCC = 3.0V).
  • Low-Current Shutdown Mode: 0.1µA (typ) _________________General.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX262 Microprocessor Programmable Universal Active Filters Maxim Integrated
MAX2622 Monolithic Voltage-Controlled Oscillators Maxim Integrated Products
MAX2623 Monolithic Voltage-Controlled Oscillators Maxim Integrated Products
MAX2624 (MAX2622 - MAX2624) Monolithic Voltage-Controlled Oscillators Maxim Integrated Products
MAX260 Microprocessor Programmable Universal Active Filters Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX2601 1W RF Power Transistors
MAX2602 1W RF Power Transistors
MAX2605 Integrated IF VCOs
MAX2606 Integrated IF VCOs
MAX2608 Integrated IF VCOs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1248; Rev 1; 5/98 KIT ATION EVALU E L B AVAILA 10MHz to 1050MHz Integrated RF Oscillator with Buffered Outputs ____________________________Features ♦ Low-Phase-Noise Oscillator: -110dBc/Hz (25kHz offset from carrier) Attainable ♦ Operates from Single +2.7V to +5.25V Supply ♦ Low-Cost Silicon Bipolar Design ♦ Two Output Buffers Provide Load Isolation ♦ Insensitive to Supply Variations ♦ Low, 27mW Power Consumption (VCC = 3.0V) ♦ Low-Current Shutdown Mode: 0.1µA (typ) _________________General Description The MAX2620 combines a low-noise oscillator with two output buffers in a low-cost, plastic surface-mount, ultra-small µMAX package. This device integrates functions typically achieved with discrete components.