Datasheet4U Logo Datasheet4U.com

MAX2630 - General-Purpose Amplifiers

General Description

The MAX2630/MAX2631/MAX2632/MAX2633 are lowvoltage, low-noise amplifiers for use from VHF to microwave frequencies.

Operating from a single +2.7V to +5.5V supply, these devices have a flat gain response to 900MHz.

Key Features

  • Single +2.7V to +5.5V Operation.
  • Internally Biased (MAX2630/MAX2631).
  • Adjustable Bias (MAX2632/MAX2633).
  • 6.6mA Supply Current (insensitive to supply voltage).
  • 1µA Shutdown Current (MAX2631/MAX2633).
  • 3.7dB Noise Figure.
  • 13.4dB Gain.
  • Ultra-Small SOT Packages ______________Ordering Information PART TEMP RANGE.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX263 Pin Programmable Universal and Bandpass Filters Maxim Integrated
MAX2631 General-Purpose Amplifiers Maxim Integrated
MAX2632 General-Purpose Amplifiers Maxim Integrated
MAX2633 General-Purpose Amplifiers Maxim Integrated
MAX2634 315MHz/433MHz Low-Noise Amplifier Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX2601 1W RF Power Transistors
MAX2602 1W RF Power Transistors
MAX2605 Integrated IF VCOs
MAX2606 Integrated IF VCOs
MAX2608 Integrated IF VCOs

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1181; Rev 3; 2/07 MAX2630–MAX2633 VHF-to-Microwave, +3V, General-Purpose Amplifiers _______________General Description The MAX2630/MAX2631/MAX2632/MAX2633 are lowvoltage, low-noise amplifiers for use from VHF to microwave frequencies. Operating from a single +2.7V to +5.5V supply, these devices have a flat gain response to 900MHz. Their low noise figure and low supply current make them ideal for receive, buffer, and transmit IF applications. The MAX2630/MAX2631 are biased internally, eliminating the need for external bias resistors or inductors. The MAX2632/MAX2633 have a user-selectable supply current, which can be adjusted by adding a single external resistor. This allows customized output power and gain according to specific applications requirements.