Datasheet4U Logo Datasheet4U.com

MAX2754 - 1.2GHz VCO with Linear Modulation Input

General Description

The MAX2754 self-contained, linear modulation, voltage-controlled oscillator (VCO) is intended for use in the 2.4GHz to 2.5GHz ISM band, particularly for FSK modulation systems that utilize a direct frequency-modulation transmit architecture.

Key Features

  • Fully Monolithic VCO Construction with On-Chip Inductor and Varactor Tuning Elements.
  • Guaranteed 1145MHz to 1250MHz Tuning Range to Support 1/2 LO.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX2751 2.4GHz Monolithic Voltage-Controlled Oscillators Maxim Integrated
MAX270 Dual 2nd-Order Continuous Lowpass Filter Maxim Integrated
MAX271 Dual 2nd-Order Continuous Lowpass Filter Maxim Integrated
MAX2741 Integrated L1-Band GPS Receiver Maxim Integrated Products
MAX2742 Single-Chip Global Positioning System Receiver Front-End Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX275 4th and 8th-Order Contnuous-Time Active Filters
MAX2750 2.4GHz Monolithic Voltage-Controlled Oscillators
MAX2752 2.4GHz Monolithic Voltage-Controlled Oscillators
MAX2753 2.4GHz Monolithic Voltage-Controlled Oscillator with Differential Outputs
MAX2700 1.8GHz to 2.5GHz Direct Downconversion Receivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.DataSheet4U.com 19-2102; Rev 2; 5/06 KIT ATION EVALU E L B AVAILA 1.2GHz VCO with Linear Modulation Input Features ♦ Fully Monolithic VCO Construction with On-Chip Inductor and Varactor Tuning Elements ♦ Guaranteed 1145MHz to 1250MHz Tuning Range to Support 1/2 LO Applications ♦ Modulation Linearity Within ±4% ♦ Precise Modulation Gain (-500kHz/V) ♦ Low Phase Noise (-137dBc/Hz at 4MHz offset) ♦ +2.7V to +5.5V Single-Supply Operation ♦ Low-Current Shutdown Mode ♦ Miniature 8-Pin µMAX® Package General Description The MAX2754 self-contained, linear modulation, voltage-controlled oscillator (VCO) is intended for use in the 2.4GHz to 2.5GHz ISM band, particularly for FSK modulation systems that utilize a direct frequency-modulation transmit architecture.