Description
The MAX3054/MAX3055/MAX3056 are interfaces between the protocol controller and the physical wires of the bus lines in a controller area network (CAN).
The devices provide differential transmit capability and switch to single-mode if certain fault conditions occur.
Features
- ±80V Fault Protection.
- Low RFI/Excellent EMC Immunity.
- Full Wake-Up Capability During Failure Modes.
- Bus Failure Management.
- Support Single-Wire Transmission Mode with Ground Offset Voltages Up to 1.5V.
- Thermally Protected.
- Do Not Disturb the Bus Line when Unpowered.
- Low-Current Sleep and Standby Mode with Wake-Up Through Bus Lines.
- Up to 250kbps Data Rate (MAX3054).
- Pin and Functionally Compatib.
MAX3054 Datasheet
