Datasheet4U Logo Datasheet4U.com

MAX3098E - Triple RS-422/RS-485 Receivers

General Description

The MAX3097E/MAX3098E feature three high-speed RS-485/RS-422 receivers with fault-detection circuitry and fault-status outputs.

The receivers’ inputs have fault thresholds that detect when the part is not in a valid state.

Key Features

  • Detects the Following RS-485 Faults:.
  • Open-Circuit Condition.
  • Short-Circuit Condition.
  • Low Differential Voltage Signal.
  • Common-Mode Range Violation.
  • ESD Protection.
  • ±15kV.
  • Human Body Model.
  • ±15kV.
  • IEC 1000-4-2, Air-Gap Discharge Method.
  • ±8kV.
  • IEC 1000-4-2, Contact Discharge Method.
  • Single +3V to +5.5V Operation.
  • -10V to +13.2V Extended Common-Mode Range.
  • C.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX30001 Single-Channel Integrated Biopotential and Bioimpedance AFE Maxim Integrated
MAX30002 Single-Channel Integrated Bioimpedance AFE Maxim Integrated
MAX30003 Ultra-Low Power Single-Channel Integrated Biopotential Maxim Integrated
MAX30003 Single-Channel Integrated Biopotential AFE Analog Devices
MAX30009 Bioimpedance Analog Front-End Analog Devices

Other Datasheets by Maxim Integrated (Analog Devices)

Part Number Description
MAX309 Precision / 8-Channel/Dual 4-Channel / High-Performance / CMOS Analog Multiplexers
MAX3093E 15kV ESD-Protected / 10Mbps / 3V/5V / Low-Power Quad RS-422/RS-485 Receivers
MAX3094E 15kV ESD-Protected / 10Mbps / 3V/5V / Low-Power Quad RS-422/RS-485 Receivers
MAX3095 15kV ESD-Protected / 10Mbps / 3V/5V / Quad RS-422/RS-485 Receivers
MAX3096 15kV ESD-Protected / 10Mbps / 3V/5V / Quad RS-422/RS-485 Receivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Click here for production status of specific part numbers. MAX3097E/MAX3098E ±15kV ESD-Protected, 32Mbps, 3V/5V, Triple RS-422/RS-485 Receivers with Fault Detection General Description The MAX3097E/MAX3098E feature three high-speed RS-485/RS-422 receivers with fault-detection circuitry and fault-status outputs. The receivers’ inputs have fault thresholds that detect when the part is not in a valid state. The MAX3097E/MAX3098E indicate when a receiver input is in an open-circuit condition, short-circuit condition, or outside the common-mode range. They also generate a fault indication when the differential input voltage goes below a preset threshold. See Ordering Information or the Electrical Characteristics for threshold values.