Datasheet4U Logo Datasheet4U.com

MAX3172 - +3.3V Multiprotocol Software-Selectable Cable Terminators/Transceivers

General Description

The MAX3172/MAX3174 contain five software-selectable multiprotocol cable termination networks.

Key Features

  • 10µs deglitching on the V.10/V.28 receiver input to facilitate unterminated operation, while the MAX3174 is used in.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX31722 Digital Thermometers and Thermostats Maxim Integrated
MAX31723 Digital Thermometers and Thermostats Maxim Integrated
MAX31725 Local Temperature Sensors Maxim Integrated
MAX31726 Local Temperature Sensors Maxim Integrated
MAX3173 +3.3V Multiprotocol 3Tx/3Rx Software-Selectable Control Transceivers Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX317 Precision / CMOS Analog Switches
MAX3170 +3.3V / Multiprotocol / 3 Tx/3 Rx / Software- Selectable Clock/Data Transceiver
MAX3171 +3.3V Multiprotocol 3Tx/3Rx Software-Selectable Control Transceivers
MAX310 CMOS RF/Video Multiplexers
MAX3100 SPI/Microwire-Compatible UART in QSOP-16

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1801; Rev 1; 1/01 +3.3V Multiprotocol Software-Selectable Cable Terminators and Transceivers General Description The MAX3172/MAX3174 contain five software-selectable multiprotocol cable termination networks. Each network is capable of terminating V.11 (RS-422, RS530, RS-530A, RS-449, V.36, and X.21) with a 100Ω differential load, V.35 with a T-network load, or V.28 (RS-232) and V.10 (RS-423) with an open circuit load for use with transceivers having on-chip termination. The devices replace discrete resistor termination networks and expensive relays required for multiprotocol termination. The MAX3172/MAX3174, along with the MAX3170 and MAX3171/MAX3173, form a complete +3.3V software-selectable DTE or DCE interface port supporting V.11/RS-422, RS-530, RS-530A, V.36/RS449, V.35, V.