Datasheet4U Logo Datasheet4U.com

MAX3430 Datasheet 80v Fault-protected / Fail-safe / 1/4-unit Load / #.3v Rs-485 Transceiver

Manufacturer: Maxim Integrated (now Analog Devices)

Overview: 19-2756; Rev 1; 4/03 ±80V Fault-Protected, Fail-Safe, 1/4-Unit Load, +3.

General Description

The MAX3430 fault-protected RS-485 transceiver

Key Features

  • ±80V protection from overvoltage signal faults on communication bus lines. Each device contains one driver and one receiver, and the output pins can withstand faults, with respect to ground, of up to ±80V. Even if the faults occur when the transceiver is active, shut down, or powered off, the device will not be damaged. The MAX3430 operates from a 3.3V supply and features a slew-rate-limited driver that minimizes EMI and reduces reflections caused by improperly terminated cables, allowing errorf.

MAX3430 Distributor

More Datasheets from Maxim Integrated (now Analog Devices)

Part Number Description
MAX3408 75/100/120 Switchable Termination Networks
MAX3440E 15kV ESD-Protected / 60V Fault-Protected / 10Mbps / Fail-Safe RS-485/J1708 Transceivers
MAX3441E 15kV ESD-Protected / 60V Fault-Protected / 10Mbps / Fail-Safe RS-485/J1708 Transceivers
MAX3442E 15kV ESD-Protected / 60V Fault-Protected / 10Mbps / Fail-Safe RS-485/J1708 Transceivers
MAX3443E 15kV ESD-Protected / 60V Fault-Protected / 10Mbps / Fail-Safe RS-485/J1708 Transceivers
MAX3444E 15kV ESD-Protected / 60V Fault-Protected / 10Mbps / Fail-Safe RS-485/J1708 Transceivers
MAX3460 +5V / Fail-Safe / 20Mbps / Profibus RS-485/ RS-422 Transceivers
MAX3461 +5V / Fail-Safe / 20Mbps / Profibus RS-485/ RS-422 Transceivers
MAX3462 +5V / Fail-Safe / 20Mbps / Profibus RS-485/ RS-422 Transceivers
MAX3463 +5V / Fail-Safe / 20Mbps / Profibus RS-485/ RS-422 Transceivers