Datasheet4U Logo Datasheet4U.com

MAX3754 - 1Gbps/2Gbps Fibre Channel Quad-Port Bypass ICs

General Description

The MAX3754/MAX3755 quad-port bypass circuits (PBCs) are designed for use in Fibre Channel Arbitrated Loop applications.

Each consists of four serially connected port bypass circuits and a repeater that provides clock and data recovery.

Key Features

  • o Pin Selectable 1.0625Gbps/2.125Gbps Dual-Rate Operation o Meets Fibre Channel Jitter Tolerance o 1400mV Typical Differential Output Swing o 3.0V to 3.6V Operation o No Reference Clock Required o Frequency Lock Indication o 1W Power Consumption (MAX3754) at +3.3V o 150Ω or 100Ω Differential L-Port Impedance Available MAX3754/MAX3755.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX3751 +3.3V / 2.125Gbps/1.0625Gbps Fibre Channel Port Bypass ICs Maxim Integrated
MAX3755 1Gbps/2Gbps Fibre Channel Quad-Port Bypass ICs Maxim Integrated
MAX3735A Low-Power SFP Laser Driver Maxim Integrated
MAX3736 SFP Laser Driver Maxim Integrated Products
MAX3738 155Mbps to 4.25Gbps SFF/SFP Laser Driver Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX3750 +3.3V / 2.125Gbps/1.0625Gbps Fibre Channel Port Bypass ICs
MAX3752 2.125Gbps / 3.3V Quad-Port Bypass with Repeater
max3701 2x Blue Laser Driver with Sample and Hold
MAX3735 2.7Gbps / Low-Power SFP Laser Drivers
MAX3737 Multirate Laser Driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-2098; Rev 1; 1/02 Dual-Rate, 1Gbps/2Gbps Fibre Channel Quad-Port Bypass ICs with Repeater General Description The MAX3754/MAX3755 quad-port bypass circuits (PBCs) are designed for use in Fibre Channel Arbitrated Loop applications. Each consists of four serially connected port bypass circuits and a repeater that provides clock and data recovery. The quad-PBC allows connection of up to four Fibre Channel L-ports; each can be enabled or bypassed by individual logic inputs. To reduce the external parts count, all signal inputs and outputs have internal termination resistors. The MAX3754/MAX3755 comply with Fibre Channel jitter tolerance requirements and can recover data signals with up to 0.7 unit intervals (UIs) of high-frequency jitter. These devices operate from a single +3.3V supply.