Datasheet4U Logo Datasheet4U.com

MAX3935 - 10.7Gbps EAM Driver

General Description

The MAX3935 is designed to drive an electro-absorption modulator (EAM) at data rates up to 10.7Gbps.

It provides programmable output levels through externally adjustable bias and modulation currents.

This EAM driver is fabricated with Maxim’s in-house second-generation SiGe process.

Key Features

  • MAX3935† o Modulation Enable Control o ESD Protection Ordering Information PART MAX3935EGJ MAX3935E/D TEMP RANGE -40°C to +85°C -40°C to +85°C PIN-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX394 CMOS Analog Switch Analog Devices
MAX3940 10Gbps EAM Driver Maxim Integrated Products
MAX3942 10Gbps Modulator Driver Maxim Integrated Products
MAX3945 SFP+ Dual-Path Limiting Amplifier Maxim Integrated Products
MAX3946 SFP+ Laser Driver Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX393 Precision / Quad / SPST Analog Switches
MAX3901 150Mbps Automotive Fiber Optic Receivers
MAX3902 150Mbps Automotive Fiber Optic Receivers
MAX391 Precision / Quad / SPST Analog Switches
MAX392 Precision / Quad / SPST Analog Switches

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-4803; Rev 1; 12/02 10.7Gbps EAM Driver General Description The MAX3935 is designed to drive an electro-absorption modulator (EAM) at data rates up to 10.7Gbps. It provides programmable output levels through externally adjustable bias and modulation currents. This EAM driver is fabricated with Maxim’s in-house second-generation SiGe process. The MAX3935 accepts differential ECL or ground-referenced CML clock and data-input signals. Inputs are terminated with on-chip 50Ω resistors. An input-data retiming latch can be used to reject input-patterndependent jitter if a clock signal is available. The driver can modulate EAM devices at amplitudes up to 3.0VP-P when the device impedance is 50Ω. Typical (20% to 80%) edge speeds are 34ps.