MAX3941 Datasheet | Maxim Integrated

Description The MAX3941 is designed to drive an electro-absorption modulator (EAM) at data rates up to 10.7Gbps. It incorporates the functions of a biasing circuit and a modulation circuit, with integrated control op amps externally programmed by DC voltages. The integrated bias circuit provides a programmable biasing current up to 50m A. This bias current reflects a bias voltage of up to 1.25V on an external 50Ω load. The bias and modulation circuits are internally connected on chip, eliminating the need for an external bias inductor. A high-bandwidth, fully differential signal path is internally implemented to minimize jitter accumulation. When a clock signal is available, the integrated data-retiming function can be selected to reject input-signal jitter. The MAX3941 receives differential CML signals (ground referenced) with on-chip line terminations of 50Ω. The output has a 50Ω resistor for back termination and is able to deliver a modulation current of 40m A P-P to 120m AP-P, with an edge speed of 23ps (20% to 80% typ). This modulation current reflects an EAM modulation voltage of 1.0VP-P to 3.0VP-P. The MAX3941 also includes an adjustable pulse-width control circuit to prepensate for asymmetrical EAM characteristics. It is available in a pact 4mm x 4mm, 24-pin thin QFN package and operates over the -40°C to +85°C temperature range. o o o o o o o o o o o Features On-Chip Bias Network 23ps Edge Speed Programmable Modulation Voltage Up to 3VP-P Programmable EAM Biasing Voltage Up to 1.25V Selectable Data-Retiming Latch Up to 10.7Gbps Operation Integrated Modulation and Biasing Functions 50Ω On-Chip Input and Output Terminations Pulse-Width Adjustment Enable and Polarity Controls ESD Protection Ordering Information PART MAX3941ETG TEMP RANGE -40°C to +85°C PIN-PACKAGE 24-Thin QFN (4mm x 4mm) Applications SONET OC-192 and SDH STM-64 Transmission Systems DWDM Systems Long/Short-Reach Optical Transmitters 10Gbps Ethernet Typical Application...