Datasheet4U Logo Datasheet4U.com

MAX4210 - High-Side Power and Current Monitors

Key Features

  • Real-Time Current and Power Monitoring ±1.5% (max) Current-Sense Accuracy ±1.5% (max) Power-Sense Accuracy Two Uncommitted Comparators (MAX4211) 1.21V Reference Output (MAX4211) Three Current/Power Gain Options 100mV/150mV Current-Sense Full-Scale Voltage +4V to +28V Input Source Voltage Range +2.7V to +5.5V Power-Supply Voltage Range Low Supply Current: 380µA (MAX4210) 220kHz.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX4200 SOT23 Open-Loop Buffers Maxim Integrated
MAX4201 SOT23 Open-Loop Buffers Maxim Integrated
MAX4202 SOT23 Open-Loop Buffers Maxim Integrated
MAX4203 SOT23 Open-Loop Buffers Maxim Integrated
MAX4204 SOT23 Open-Loop Buffers Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX4211 High-Side Power and Current Monitors
MAX4212 Miniature / 300MHz / Single-Supply / Rail-to-Rail Op Amps
MAX4213 Rail-to-Rail Op Amps
MAX4214 Rail-to-Rail Buffers
MAX4215 Rail-to-Rail Buffers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-3285; Rev 0; 6/04 KITS ATION EVALU ABLE AVAIL High-Side Power and Current Monitors General Description Features ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ ♦ Real-Time Current and Power Monitoring ±1.5% (max) Current-Sense Accuracy ±1.5% (max) Power-Sense Accuracy Two Uncommitted Comparators (MAX4211) 1.21V Reference Output (MAX4211) Three Current/Power Gain Options 100mV/150mV Current-Sense Full-Scale Voltage +4V to +28V Input Source Voltage Range +2.7V to +5.5V Power-Supply Voltage Range Low Supply Current: 380µA (MAX4210) 220kHz Bandwidth Small 6-Pin TDFN and 8-Pin µMAX Packages (MAX4210) MAX4210/MAX4211 The MAX4210/MAX4211 low-cost, low-power, high-side power/current monitors provide an analog output voltage proportional to the power consumed by a load by multiplying load current and source voltage.