Datasheet4U Logo Datasheet4U.com

MAX4270 - Ultra-Low-Distortion / Single-Supply / 300MHz Op Amps with Enable

Download the MAX4270 datasheet PDF. This datasheet also covers the MAX variant, as both devices belong to the same ultra-low-distortion / single-supply / 300mhz op amps with enable family and are provided as variant models within a single manufacturer datasheet.

General Description

The MAX4265

MAX4270 single-supply, voltage-feedback op amps are capable of driving a 100Ω load while maintaining ultra-low distortion over a wide bandwidth.

Key Features

  • make the MAX4265.
  • MAX4270 ideal for use in high-performance communications and signalprocessing.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (MAX-4270.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
MAX4271 3V to 12V Current-Limiting Hot-Swap Controllers Maxim Integrated
MAX4272 3V to 12V Current-Limiting Hot-Swap Controllers Maxim Integrated
MAX4273 3V to 12V Current-Limiting Hot-Swap Controllers Maxim Integrated
MAX4274 Fixed-Gain GainAmps/Open-Loop Op Amps Maxim Integrated
MAX4275 Fixed-Gain GainAmps/Open-Loop Op Amps Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX427 Low Noise / High-Precision Op Amps
MAX420 15 Volt Chopper Stabilized Operational Amplifier
MAX4210 High-Side Power and Current Monitors
MAX4211 High-Side Power and Current Monitors
MAX4212 Miniature / 300MHz / Single-Supply / Rail-to-Rail Op Amps

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1552; Rev 0; 10/99 Ultra-Low-Distortion, Single-Supply, 300MHz Op Amps with Enable General Description The MAX4265–MAX4270 single-supply, voltage-feedback op amps are capable of driving a 100Ω load while maintaining ultra-low distortion over a wide bandwidth. They offer superior spurious-free dynamic range (SFDR) performance: -90dBc or better at frequencies below 5MHz and -60dBc at a 100MHz frequency. Additionally, input voltage noise density is 8nV/√Hz while operating from a single +4.5V to +8.0V supply or from dual ±2.25V to ±4.0V supplies. These features make the MAX4265–MAX4270 ideal for use in high-performance communications and signalprocessing applications that require low distortion and wide bandwidth.