Datasheet4U Logo Datasheet4U.com

MAX4410 - 80mW / DirectDrive Stereo Headphone Driver

General Description

The MAX4410 stereo headphone driver is designed for portable equipment where board space is at a premium.

Key Features

  • o No Bulky DC-Blocking Capacitors Required o Ground-Referenced Outputs Eliminate DC-Bias Voltages on Headphone Ground Pin o No Degradation of Low-Frequency Response Due to Output Capacitors o 80mW Per Channel into 16Ω o Low 0.003% THD + N o High PSRR (90dB at 1kHz) o Integrated Click-and-Pop Suppression o 1.8V to 3.6V Single-Supply Operation o Low Quiescent Current o Independent Left/Right, Low-Power Shutdown Controls o Short-Circuit and Thermal Overload Protection o ±8kV ESD-Protected Amplifier.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX4411 Stereo Headphone Amplifier Maxim Integrated Products
MAX4400 Rail-to-Rail Op Amps Maxim Integrated
MAX44000 Ambient and Infrared Proximity Sensor Maxim Integrated Products
MAX44007 Low-Power Digital Ambient Light Sensor Maxim Integrated Products
MAX44009 Ambient Light Sensor Maxim Integrated Products

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX441 Low-Power / +3V/+5V / 400MHz Single-Supply Op Amps
MAX4412 Low-Cost / Low-Power / Ultra-Small / 3V/5V / 500MHz Single-Supply Op Amps
MAX4413 Low-Cost / Low-Power / Ultra-Small / 3V/5V / 500MHz Single-Supply Op Amps
MAX4414 Low-Power / +3V/+5V / 400MHz Single-Supply Op Amps
MAX4415 Low-Power / +3V/+5V / 400MHz Single-Supply Op Amps

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-2386; Rev 2; 10/02 80mW, DirectDrive Stereo Headphone Driver with Shutdown General Description The MAX4410 stereo headphone driver is designed for portable equipment where board space is at a premium. The MAX4410 uses a unique, patented, DirectDrive architecture to produce a ground-referenced output from a single supply, eliminating the need for large DC-blocking capacitors, saving cost, board space, and component height. The MAX4410 delivers up to 80mW per channel into a 16Ω load and has low 0.003% THD + N. A high powersupply rejection ratio (90dB at 1kHz) allows this device to operate from noisy digital supplies without an additional linear regulator. The MAX4410 includes ±8kV ESD protection on the headphone outputs.