Datasheet4U Logo Datasheet4U.com

MAX4507 - Fault-Protected / High-Voltage Signal-Line Protectors

General Description

The MAX4506/MAX4507 multiple, two-terminal signal-line protectors are pin-compatible with the industry-standard MAX366/MAX367.

These new circuit protectors feature fault-protected inputs and Rail-to-Rail® signal handling capability.

Key Features

  • o Overvoltage Protection ±40V with Power Off ±36V with Power On o Open Signal Paths with Power Off o Output Clamps to Either Rail with an Input Overvoltage o Any On Channel Output is Not Affected by an Overvoltage to Any Other Channel o 100Ω max On-Resistance o 10ns Overvoltage Turn-On Delay o No Latchup During Power Sequencing o Rail-to-Rail Signal Handling o 500Ω Output Clamp Resistance During Overvoltage MAX4506/MAX4507 Ordering Information PART MAX4506CSA MAX4506CPA MAX4506C/D MAX4506ESA M.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
MAX4520 SPST Analog Switches Maxim Integrated
MAX4524L (MAX4524L / MAX4525L) Single-Supply Analog Multiplexers/Switches Maxim Integrated Products
MAX4525L (MAX4524L / MAX4525L) Single-Supply Analog Multiplexers/Switches Maxim Integrated Products
MAX4534 Single 4-to-1/Dual 2-to-1 Multiplexers Maxim Integrated
MAX4535 Single 4-to-1/Dual 2-to-1 Multiplexers Maxim Integrated

Other Datasheets by Maxim Integrated (now Analog Devices)

Part Number Description
MAX450 CMOS Video Amplifier
MAX4501 Low-Voltage / SPST / CMOS Analog Switches
MAX4502 Low-Voltage / SPST / CMOS Analog Switches
MAX4503 Low-Voltage / Dual-Supply / SPST / CMOS Analog Switches
MAX4504 Low-Voltage / Dual-Supply / SPST / CMOS Analog Switches

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
19-1415; Rev 1; 8/99 Fault-Protected, High-Voltage Signal-Line Protectors General Description The MAX4506/MAX4507 multiple, two-terminal signal-line protectors are pin-compatible with the industry-standard MAX366/MAX367. These new circuit protectors feature fault-protected inputs and Rail-to-Rail® signal handling capability. The input pins are protected from overvoltage faults up to ±36V with power on or ±40V with power off. During a fault condition, the input terminal becomes an open circuit and only nanoamperes of leakage current flow from the source; but the switch output (OUT_) furnishes typically 19mA from the appropriate polarity supply to the load. This ensures unambiguous rail-to-rail outputs when a fault begins and ends.